The area rug adds a statement personality to the home. They add comfort and bring a pop of color to the interior of your home. However, it has to be cleaned regularly. Here is an article on how to clean the car area rug at the carwash.

How to Clean an Area Rug at Carwash

Carwash centers have the necessary tools and equipment to clean the area rug. The area rug gets dirty after some time. At the car wash, they clean the area rug efficiently.

Step 1: Prepping the Rug

Before taking it to the car wash, make sure you have prepped the dirty rug for the wash.

1. Vacuum the dirt from the area rug. This will clean bug articles of dirt from the area rug.
2. Use the brush attachment to dust off the dirt from the area rug.
3. Next, you can lay down the rea rug upside allowing it to get compressed. Sweep it thoroughly from the sides to clean any debris or loose gunk.
4. Sweeping the area rug removes hair, food, dust particles, and soil residue from the area rug.
5. It allows you to get the area rug clean efficiently when pressure washed at the car wash. Same goes with pressure washing gutters.

After you sweep it well, take the rug outside and give it a good shake. The heavy debris and dust fall off, cleans the dust accumulated in the inter-woven fabric design.

Step 2: Use Vinegar and Baking Soda for Stains

Have you spilled coffee by mistake? The stain can look shabby on your carpet. Vinegar has acidic nature that dissolves the stains.

1. Take equal parts baking soda and equal part white vinegar and mix it well. This mixture also works well in cleaning Kilim rugs, your radiator, and safety razors.
2. Before applying it on all stains, do a patch test.
3. Spread the mixture over the stain and leave it for 15 minutes.
4. Scrubb the spot well with a toothbrush; keep scrubbing until the stain comes off.
5. Next, apply Oxiclean stain remover over the stain.
6. It is advisable to do a patch test, as OxiClean has strong chemicals that can lead to discoloration of the rug.

Step 3: Packing and Arriving at Car Wash

After the stains and debris have been cleaned, roll the carpet to take it to the nearest car wash.

1. Roll the carpet and bind it with rope or bungee cords.
2. The size of the area rug influences the storage option in the car.
3. If the carpet does not fit inside the trunk, put it over the car head and secure it with ropes.
4. Take it to the nearest car wash, and we advise you to take the prior appointment so you won’t have to wait in long lines.
5. Once you arrive at the car wash, clean your workspace and then lay the rug on the floor.

Do not fold the carpet as this can break the design; roll it and then travel with the rug.

Step 4: Washing at Car Wash

Lay the rug on the floor, make sure the floor is clean, and do not have debris. Before using the pressure washer, check for any wax or soap residue on the nozzle.

1. After you lay the rug on the floor, mark the spot with heavy stains.
2. Take the sprayer, open it and spray it away from the area rug. Do a test run away from the rug to ensure the pressure of water is in control.
3. Take the sprayer and point it towards the area rug; keep the wand 0.3meters away from the rug.
4. Stay at a distance that is neither too close nor too far from the carpet; make sure you have a good hold of the sprayer and the wand.
5. Spray it over the dusty rug and start rinsing it well.

The grip of the wand is an essential factor, as it makes the cleaning process easier.

However, a loose grip can damage the area carpet. Here is a video guide you can follow to understand better the steps to wash the area rug.

Step 4: Use Baking Soda

To clean the rug thoroughly, you must have a cleaning agent for stains. One of them is baking soda powder.

1. While visiting the car wash, take baking soda powder along with you.
2. Sprinkle a handful of baking soda all over the area rug.
3. Sprinkle or dab it well over the heavy stains. Once applied, leave it for 5 minutes. The baking soda powder has bicarbonate of soda and acid that acts as a raising agent over the stains.
4. After that, spray water from a pressure washer. Rinse the carpet area well, and you can even use some soap solution to clean the gunk from the carpet.

Keep rinsing until the soap, and baking soda comes off. Check it for any remaining residue, and then repeat the rinsing procedure.

Step 5: Drying

After washing it well, the last step is to dry it well.

1. Roll up the rug and prop it against the wall or your car.
2. Leave it in that position for a while; let the extra water drain away.
3. After rinsing the carpet becomes heavier, call for assistance to carry the rug home.
4. You can ask the car wash worker to help you put the rug over the car roof, secure it well with the ropes.
5. Take it home and find a drying spot for the area carpet. Place it over a dirt-free area, and you can use keep a mat or cloth on the ground and put the area rug over it.
6. Lay in under the sun or keep it under the high-speed fan in a well-ventilated room.
7. Leave it for a day, so the rug dries thoroughly.

Maintenance of Area Rug

Are you using an area rug instead of a carpet? Then you must know some tips and tricks of maintaining it well. After cleaning the carpet, it’s equally important to look out for methods to keep it clean without much hassle.

• Remove Shoes

This is an absolute classic method to keep your rug clean. Keep the shoes off from the rug, and you are preventing the rug from wear and tear by hard shoe sole. 

It also prevents compression of dirt into the rug; instead of shoes, wear soft furry slippers that won’t cause that much harm to the rug.

• Shake The Rug

Give a good shake to the area rugs regularly. If the rug is not big enough, take it out and give it a good shake; this will break the debris and dirt build-up. 

Even the large rug can be rolled and taken outside; take a baseball bat or a broom and smack the rug. 

The chunks of debris and dust come off from the carpet. You can do it every weekend to save the time of deep cleaning.

• Vacuuming Regularly

Vacuuming is the breezy method of maintaining the carpet for the long run. Vacuuming regularly in a systematic way cleans the loose dust and dirt from the carpet.

• Include Quality Padding

Have you brought a fancy area rug? Then include quality pudding to the rug. This is by far the best method to prevent the rug from wear and tear. In addition, a quality padding underneath enhances the comfort factor and prevents it from slipping away

• Rotate Them Regularly

Make sure you rotate the once in a while, depending upon the foot traffic. The rug is made to accumulate the dirt; flipping on the other side makes sure to balance the dirt over the area rug.

• Remove Stains

The stains take away the elegance and attractiveness of the rug. But that doesn’t mean it belongs to trash. Instead, you can remove the stan with some handy stain cleaning tips.

Frequently Asked Questions

How Can I Clean Fleas From the Area Rug?

Baking soda is an effective and efficient method to kill fleas from the carpet. Sprinkle a handful of baking soda over the carpet and leave it overnight or 24 hours; after 24 hours, wash it off with soap and water. You will get disinfected and flea-free carpet with this procedure.

How Often Should an Area Rug Be Cleaned?

It must be cleaned once a year, providing the maintenance is done every week, like vacuuming the rug. If the dust and debris are not swept off once a week, a thorough clean must be done in six months.

Can I Steam Wash the Area Rug?

Yes, the Steam wash is the most effective method to sanitize the area rug. It cleans 99% of the bacteria and loosens the dirt and grime from the carpet.

Conclusion

The area rug enhances the beauty of your home. It gives comfort and warmth to your feet. Unfortunately, the area rug can get filthy for numerous reasons, so we have listed all the possible methods to clean it.

Car wash is the easiest method to get it cleaned; all you need is a little prepping up before reaching for the car wash.

Rhodium-plated sterling silver is a type of rhodium-plated sterling silver that requires exceptional keeping. It’s beautiful but if it’s not properly taken care of, it will need a new coating sooner than expected. Here are some tips on how to clean rhodium plated sterling silver so that it looks as good as new.

How to Clean Rhodium Plated Sterling Silver  

Cleaning rhodium-plated sterling silver involves four major steps; soaking, rinsing, drying, and storing the piece of rhodium-plated sterling silver. When it comes to the materials required, you only need water, provided it is not high-pressure, some mild detergent, and a soft cloth.

Rhodium is a precious metal of the platinum group. If not properly cared for, the rhodium will fade with time. Given that rhodium costs more than gold, it is generally important to take care of it to retain the overall value of your rhodium-plated sterling silver.

What Are Sterling Silver and Rhodium Plate?

Sterling silver, is a silver alloy composed of 92.5 percent pure silver and 7.5 percent copper, or any other metal. Sterling silver is typically identified by its hallmark stamp, 925, representing 92.5 percent silver content.

You’re probably wondering where the rhodium plating comes into play. Rhodium is a gleaming silvery-white rare earth metal that is a member of the platinum group of metals. The metal has grown in appeal in the rhodium-plated sterling silver industry because of its hardness, endurance, and natural brilliance.

The most exciting characteristic of rhodium is that it does not corrode: it does not oxidize when exposed to air and does not tarnish. It is used to improve the durability, brilliance, and light reflection of a piece of rhodium plated sterling silver. Furthermore, because rhodium is a strong metal, rhodium-plated rhodium-plated sterling silver is more scratch-resistant.

What You Need to Clean Rhodium Plated Sterling Silver

Don’t be startled by this list of items; most of them may be obtained in your own house. If you don’t already have one, you may need to purchase a polishing cloth, but otherwise, you should have everything in your kitchen cabinet. You will require:

• Two bowls
• Mild detergent
• A soft towel or a microfiber cloth
• A soft polishing cloth, although this is optional

If you have multiple rhodium-plated pieces of rhodium-plated sterling silver to clean, consider cleaning them all at once to save time.

Also, if you decide to use a microfiber cloth, be sure it hasn’t been chemically treated. The idea is to avoid using anything harsh on your rhodium-plated sterling silver, whether chemical or abrasive. This soft towel or soft cloth is also helpful in cleaning wrought iron furniture.

What You Need to Avoid While Cleaning Rhodium Plated Sterling Silver

Before you begin cleaning your rhodium-plated sterling silver rhodium-plated sterling silver, let’s go over the cleaning agents you should avoid using on your rhodium-plated sterling silver.

• Harsh chemicals
• Silver dips
• Any abrasive
• Toothbrushes
• Toothpaste
• Ammonia-based chemicals
• Polishing cloths for silver or gold

Harsh chemicals should never be used on sterling silver or rhodium-plated sterling silver. Although rhodium plating is scratch-resistant, you don’t want to ruin it by using inappropriate materials. Zinc is not necessary to use harsh chemicals to clean as well.

While toothbrush or toothpaste is not recommended for sterling silver, cleaning the safety razor will be helpful to get rid of rust by using a decent amount of toothpaste.

Furthermore, avoid using any chemicals meant for cleaning rhodium-plated sterling silver or sonic-cleaning equipment. The majority of sonic equipment bounces the rhodium-plated sterling silver hence causing damage.

Cleaning Your Rhodium-Plated Silver

The best method to safeguard and extend the life of your rhodium-plated silver is to keep it clean. Let us begin cleaning now that you have your supplies and jewels ready.

If you’re inexperienced with the steps, simply go slowly so you don’t inadvertently harm anything. You’ll become acclimated to the cleaning procedure, and your rhodium-plated sterling silver will appear better as a result.

1. Soak the Rhodium Plated Sterling Silver in a Cleaning Agent

Combine a third cup of a gentle liquid detergent and one cup of warm water in a mixing dish. Then, dip the rhodium-plated goods in the mixture for a few minutes to remove any dirt lodged on the surface. 

Allow the objects to soak in the foamy water for at least 10 minutes, but not more than fifteen minutes. Consider using a timer because the time includes cleaning time, and any extra time might result in harm.

Carefully massage all of the materials inside the bowl with your fingertips. As previously stated, do not use toothbrushes or other abrasive objects. Rhodium does not tarnish; thus, your fingertips will be fine.

2. Rinse off Your Soaked Rhodium Plated Sterling Silver

Fill a sink bowl with water by placing your sink stopper tightly over the drain and pouring lukewarm water through it. In case you are connected to a hard water source, do not use it. It will leave stains on your rhodium-plated sterling silver, exactly as it did on the door of your shower and use distilled or bottled water instead.

Rinse the rhodium-plated sterling silver under the water source of your choice to eliminate all of the bubbly water. You might alternatively use a second bowl with tap water and you can replenish the water in the bowl as many times as you like, as long as you use room temperature water.

The crucial thing in this step is to eliminate all of the soap residues, and whether your rinse water appears soapy or clear is a good sign. Be delicate all throughout the rinsing process so you don’t harm the rhodium plating on your sterling silver.

3. Dry the Rhodium Plated Sterling Silver

Put your rhodium-plated sterling silver on a silky, clean towel or microfiber cloth to dry. It’s worth noting that the softer the towel, the better, so if you have one made of Egyptian cotton, use it.

Next, pat it gently to remove any extra moisture from the objects. Remember that friction causes plating to fall off; therefore, the softer you are, the longer the rhodium plating will remain. You may opt to dry the rhodium-plated sterling silver using a hairdryer on the lowest setting of heat available but if you don’t have one, let it air-dry all night.

4. Store the Rhodium Plated Sterling Silver

When storing the rhodium-plated sterling silver use tissue paper. If you have several pieces, wrap each on a piece of paper separately. The tissue shields the rhodium-plated sterling silver and protects it from grinding against anything that may cause a scratch.

If you don’t have a rhodium-plated sterling silver box, store your silver rhodium-plated sterling silver in the box it came in or in a zip lock bag or airtight container. Add any silica gel packs you have, which are commonly found in shoe boxes and vitamin jars.

Silica gel packs are called desiccants because they absorb moisture, which helps to prevent and reduce tarnish.

Tips for Caring for Your Rhodium-Plated Sterling Silver

• Avoid wearing sterling silver or rhodium-plated sterling silver in water, particularly swimming pools and spas, is usually recommended because chlorine can corrode your rhodium-plated sterling silver in a brief period.
• Avoid contact with shampoos, fragrances, and deodorants whenever feasible. In addition, we recommend taking off rhodium-plated sterling silver before going to bed and when undertaking hard labor such as gardening or cleaning.
• Avoid touching your ring’s rhodium coating. Constantly washing your hands, for example, might cause it to wear off faster.
• Habits such as pushing or moving a pendant down a chain can strain and weaken the chain over time.
• When cleaning your rhodium-plated sterling silver, avoid scrubbing it too hard and be careful. These techniques will keep your rhodium-plated sterling silver appearing as gleaming and new as possible for as long as possible.
• Polishing is optional, but if you notice the necessity, use a polishing cloth to give the piece of rhodium-plated sterling silver a gleaming appearance. Remember to polish it with the grain, not against it.
• If you are still unclear about adequately cleaning your rhodium-plated piece, mainly if it contains a diamond or ruby, seek expert assistance. It’s pretty simple to damage rhodium-plated sterling silver, and you don’t want to lose all of your money in an instant.

Frequently Asked Questions

Can You Use Jewelry Cleaner on Rhodium Plated?

No, you should never use regular rhodium-plated sterling silver cleaners on it since the strong chemicals can damage the plating. Clean your rhodium-plated sterling silver with warm water and a light liquid soap to keep it from tarnishing. Use a light polishing cloth as well, and dry promptly.

Moreover, polishing is also helpful in other materials like cleaning nickel silver. It can use to remove dirt immediately.

How Long Should You Leave Rhodium Plated Sterling Silver in Soapy Water?

You need to soak your rhodium-plated sterling silver in soapy water for ten minutes. Make sure to not leave it for more than 15 minutes to avoid rusting and tarnishing. Consider utilizing a timer because the excess time may cause harm to your item.

Conclusion

Rhodium-plated sterling silver is simple to care for as long as you follow the proper maintenance instructions. Remember to avoid harsh chemicals while cleaning your rhodium-plated sterling silver, don’t rub it too hard, and be careful. These measures will ensure that your rhodium-plated sterling silver’s quality is well-maintained.

Cars play a very important role in our lives as we spend a lot of time traveling in them. However, with this comes issues like regular car maintenance and seat cleaning. An individual invests a lot in his car, and he wants to keep it clean and in proper condition over the years to come.

How to Clean Between Car Seats

Even if the exterior and visible interior of your car look tidy, the hidden areas between car seats might still have dust, dirt, or stain that needs a thorough cleaning.

You will need the right tools and techniques for moving ahead with the cleaning process of car seats.

Please go through this guide and learn the cleaning process on how to clean between car seats, making it spotless.

Method 1: Cleaning Dust & Dirt Between the Car Seat Folds

A portable vacuum cleaner is an undeniable thing for you to buy if you own a car. And, for this method, it is a must-to-have tool. If not, then you can borrow it or rent it for the purpose. Now, follow the cleaning steps:

Step 1: Get the Supplies Ready

1. You will need a car vacuum cleaner. (Portable)
2. Get a crevice tool for cleaning the nooks.
3. It is better to have a brush with stiff bristles for in-depth cleaning.
4. Buy a Compressed air can.
5. You can use Steam cleaner for stain cleaning.
6. You will need a dry microfiber cloth.
7. Use gloves for hygiene concerns.

Step 2: Use Vacuum Cleaner to Suck Loose Dirt

1. Use the right vacuum hose with the machine.
2. Do not use unwanted attachments for this purpose.
3. Remove loose dirt & dust off the seat folds, both back & bottom.
4. Use crevice attachment to clean the seams of the seat. (Both bottom & back)
5. Use your fingers to spread the seat seam and run the crevice attachment over it.
6. Pay attention to the meeting point of the seat’s back and bottom part.
7. Keep moving back and forth to get rid of all dust and dirt.

Step 3: Use Stiff-Bristle Brush for In-Depth Cleaning

1. Use a brush to clear out all the dirt remnants from the seat fiber.
2. Attach the brush to the vacuum hose, and run it between the seat folds.
3. It will do a thorough cleaning around the folds & seams for both the back & bottom area.

Method 2: Cleaning Between Car Seats and Center Console

After the seat folds, it’s time for you to move on to the tight spaces within your car, like the part between the seat & console. This area is very much tight and congested. Therefore, it isn’t very easy to carry out the cleaning process in the said region.

However, you don’t need to worry; follow the below steps to ensure a better approach:

Step 1: Prep the Surroundings & Arrange the Supplies

Firstly, remove all the things stored in the console to avoid hindrances. For example, do not let small objects sit around the console, as the vacuum cleaner might suck them. Also, some things such as chips packets, old receipts, coins, and others will obstruct the cleaning process. So, get rid of them all.

Moving on, the supplies that you will need for this cleaning method are:

1. Vacuum cleaner
2. Car compressor
3. Cleaning brush tool
4. Steam cleaner
5. Microfiber cloth

Step 2: Use Vacuum Hoover Between Seat and Console

1. Use the vacuum cleaner with a hose for the purpose.
2. Run it around the console and the gaps that connect with the seats.
3. Move the vacuum back & forth to remove all debris and dirt from this area.

Step 3: Use Car Air Compressor to Dislodge Small Particles

1. Get a car air compressor from online or offline stores.
2. Direct the pressurized air between seats and console.
3. Compressed air will remove all the small particles from those tight areas.
4. Use a dry cloth to clean the area after this step.

Step 4: Cleaning With Steam Cleaner

1. Use a steam cleaner to get rid of the stains in between car seats and the console.
2. Place the steam cleaner opening directly on the stained area.
3. Hold it that way for the next few minutes.
4. Use a bristle brush tool and attach it to a vacuum.
5. Now, brush the stained area using it.
6. Leave that area to dry completely.

In this YouTube video, you can visualize the cleaning process of cleaning around the seats and tight areas in your car.

Method 3: Cleaning Between the Car Seat Tracks

Often, people forget about the cockpit seat tracks, which are also home to dirt, dust, and debris. These tracks have pits that allow the seats to move front or back. And these small pits hold the debris such as food remnants and dirt.

So, cleaning the seat tracks is also an important job to perform for keeping your car spotless.

Step 1: Get the Supplies

1. You will need a hand-held vacuum for this cleaning method.
2. Using a crevice tool is recommended.
3. A paintbrush to clean the track pits.
4. Finally, a hand-held brush with firm bristles.

Step 2: Prepare Car Interior Surface for Cleaning

1. Remove the floor carpets from your car. (front & back)
2. Move the seats forward. Pull the lever underneath the front seats and push the seats forward from behind.
3. It will give you enough space to properly clean the seat tracks & back area.

Step 3: Vacuum the Dust Underneath the Carpet

1. After you remove the secondary carpet, you will see the dust accumulated on the main carpet.
2. Sweep dust and dirt from the front side to the backside of the car.
3. It is to dislodge dirt and dust particles and make it easy for you to vacuum them out.
4. Use the hand-held vacuum cleaner in one hand and the bristled brush in the other.
5. Make sure you have attached the crevice tool to the vacuum hose.
6. Vacuum the carpet, and use the bristle brush over it at the same time.
7. It will remove the small particles and prevent them from staying in the pores of the car carpet.
8. Repeat the process until the carpet is completely clean.

Step 4: Clean Seat Track Rails Using Crevice Tool

1. Direct the hand-held vacuum cleaner hose with crevice tool towards the seat track rails.
2. Suck out the dirt, dust, and debris from those track pits.
3. Prefer to set the vacuum on moderate suction to avoid getting rid of lubricant, which allows the seat to move front or back smoothly.
4. For tough crevices, vacuum attachment might not be adequate. Therefore, use a small paintbrush to sweep out tough crevices on the tracks.
5. Now, push back the seat to the extreme back-end of the rail to clean the front-end rails as well.
6. Repeat the steps for the seat track on the passenger side as well.

Frequently Asked Questions

Is It Necessary to Remove Car Seats for Cleaning the Tight Areas in Between Them?

Modern cars come with electronic-adjustable seats to easily glide as per desirable direction. This gives ample space for cleaning between the seats and other areas. Therefore, there is no such necessity of removing the seats.

However, a little effort is required to clean between the seats of older cars; still, it is possible with the above methods. 

If the spots are too tight in your old car, then go ahead and remove the seats for a better approach. In this article, you will get details about removing the seats of your car for cleaning purposes.

Conclusion

Even though it is pretty challenging to clean all nooks and crevices of the car’s interior, but it’s not impossible.  Also, the most missed-out parts are the tight areas in between the seats and underneath them.  However, the above methods are adequate to help you clean these tough areas and attain a “new-like” look of your car.

Remember when you first got your safety razor? It was beautiful and shiny, and you couldn’t wait to use it. This may not be the case right now.

Lack of proper cleaning has made it lose its shine, and looking at it does not give you the urge to shave. Thankfully, the situation can be reversed. In this guide, you will discover how to clean a safety razor and regain its shine.

How to Clean a Safety Razor

It is essential that you regularly clean your safety razor after every use. All you have to do is take it apart and rinse every part with running water, then dry the pieces by wiping them with a hand towel. There are different types of safety razors, but the process of cleaning them is the same.

If you have had your safety razor for a long time without cleaning it regularly, it is at risk of rusting and having a build-up of bacteria. Rinsing will not suffice. You will have to do more than rinsing for your razor to perform well.

When your safety razor shows signs of build-up or white powdery coating on the surface, it is time to clean it.

Periodic Cleaning

Depending on the type of water pressure you have, cleaning the safety razor can be done weekly for some people or monthly for others. If your water pressure is low, do it monthly, and if it is high weekly cleans will work for you. If you do deep cleaning once in a while, you can get away with just rinsing it after use for some time before you have to clean it properly.

To clean your safety razor, you will need the following essential cleaning tools:

• Warm water
• Dish soap
• A toothbrush with soft bristles
• Rubbing alcohol
• Toothpicks and Q-tips

Fill your sink with warm water and add some dish soap and not dishwasher soap. Disassemble the safety razor and scrub each part with the toothbrush. Scrub in a manner that will not scratch the surface, but at the same time, it dislodges the build-up.

The toothpicks and Q-tips will help you reach crevasses that the toothbrush cannot reach. Fill a bowl with rubbing alcohol and use a toothbrush to scrub the safety razor gently. Apart from disinfecting it, the alcohol will remove any soap scum or remaining build-up.

Once all the alcohol has evaporated, you will notice your safety razor is shinier.

Deep Cleaning

For this procedure, you will need:

• Vinegar
• Water
• Toothbrush
• Baking soda

Vinegar is a powerful cleaning ingredient that can be used to clean different items in your home, including your ceiling fans. Meanwhile, the solution of water and vinegar is very effective to clean your instruments like cymbals.

In a ratio of one part of vinegar to four parts of water, form a solution in a bowl. Disassemble the safety razor and soak all the parts for 10 minutes. Using the toothbrush, scrub all the parts until they are clean.

If your safety razor is too stubborn for the vinegar to handle, add baking soda to form a paste and scrub the parts. A high concentration of vinegar corrodes stainless steel, so be careful not to let that happen. You can test your solution on a small part of the razor to be sure.

After scrubbing, rinse with warm water and let the parts dry before putting them back together. You may want to lubricate the threads with oil, grease, or petroleum jelly.

Removing Rust

Sometimes, you may forget about your safety razor; this happens if you have more than one. So, what happens if one day you check your bathroom cabinet and discover that your safety razor has rusted? You may want to throw it away and count it as a loss, but that does not always have to be the case.

Using Toothpaste

Try removing rust using the deep cleaning method. If deep cleaning proves futile, use hot soapy water to brush off the stubborn bits and once you have most of the rust off, apply toothpaste to the blade. Toothpaste lathers nicely and has proven to be effective in cleaning off stubborn stains.

Using Baking Soda and Vinegar

Vinegar and baking soda are one of the cheapest way to clean your things like a vehicle’s radiator while vinegar it can clean your jewelry, including your anodized rings.

For this procedure, put some warm water in a bowl and add an equal measure of white vinegar. Take two to three tablespoons of baking soda and add to the mixture. Put in your safety razor after you have disassembled it and soak for about two hours.

After the two hours have elapsed, most of the rust will have come off. You can use a toothbrush to get the remainder out.

Boiling the Safety Razor

You probably think you should get water in a pan, toss your safety razor in and turn the heat on, right? Do not do this, as it will damage the metal if you place it directly on the pan. The best method is to put it in a colander first and then in the pan.

Boil it for 10 minutes, and then let it cool. At no point should you add cold water to make it cool faster? You should avoid using cold water because it will cause a sudden change in temperature that may damage the razor.

Clean the razor with a toothbrush and warm soapy water once it is cool enough for you to handle.

Preventing Rust

Most people prefer to use rubbing alcohol to sterilize the safety razor and prevent rust from developing. However, you can also go for specialized oils such as linseed oil. These oils protect against corrosive oxidation by forming a protective liquid barrier.

Most safety razor blades typically last for five shaves. It is vital that you change it earlier than you need to to avoid a bad shave. If you shave less frequently, it may take longer to replace the safety razor.

If you do not change your safety razor, it will collect bacteria, hair, shaving cream, and dead skin cells, which will increase your risk of infection. You are also likely to nick yourself and get an awful shaving experience.

Conclusion

Finding a method of cleaning your safety razor is not tricky. You have to factor in how long you have gone without cleaning it, the type of water you have, and the amount of dirt accumulated. At the same time, you have to know how to store your safety razor properly to prevent it from rusting.

If you recently bought a lash or eyebrow serum that did not come with an applicator brush, you might be wondering how to apply it without having to buy a new one. Learn how to clean a Mascara tube for storing growth serums as long as they are kept clean.

How to Clean Out a Mascara Tube

In today’s environment, it’s all too easy to throw something away and replace it with something new. However, before you toss out your old mascara, consider the many ways it could be repurposed. 

It might be far more helpful than you ever imagined!  Keep reading to learn how to clean out a mascara tube.

What Do You Need to Clean a Mascara Tube?

• Eye makeup remover
• Dish soap
• Small bowl
• Paper towels
• Rubbing alcohol

There are two main methods of cleaning out a mascara tube for reuse; using soap and warm water or eye makeup remover and warm water. 

How to Clean the Mascara Tube by Soaking it in Makeup Remover

It is important to note, using a water-based makeup remover is better than an oil-based one because the former won’t leave any residue on your mascara tube. The following steps will walk you through the process of cleaning your mascara tube. 

Get a Water-based Makeup Remover 

Fill the mascara tube halfway with your water-based makeup remover—the makeup remover aids in the breakdown of any remaining mascara in the tube. Fill the tube with eye makeup remover to the top. If you do not have any eye makeup remover, rubbing alcohol can suffice. 

Also, keep in mind that oil-based makeup removers do not mix well with water and can leave a residue in your mascara tube.

Swirl the Mascara Wand in the Tube 

To loosen the mascara, pump the mascara wand into the tube, reinsert it into the tube and swirl it around a couple of times. You can remove some of the loose mascara out of the tube with the wand. You will also be cleaning the wand if you wish to reuse it throughout this process.

Soak the Makeup Remover

Close the tube and soak the makeup remover. Allow the mascara tube to rest for at least 3 hours after closing the lid with the wand inside. It is recommended that if your mascara is waterproof, soak the tube overnight. 

Allowing the tube to soak allows the makeup remover to break down more of the mascara inside for easier removal.

Gently Remove the Makeup Remover 

Remove the makeup remover from the tube and place it on a paper towel. Remove the wand from the top of the mascara tube and squeeze as much makeup remover onto a paper towel as you can. 

If a small amount comes out, do not worry, as there could be residue at the bottom of the tube. Pouring makeup remover and mascara down the drain might cause your sink to clog over time.

Remove the Rubber Insert 

If your mascara tube has a rubber insert, check for it and remove it. This step needs the tines of a fork to clear out the tube. The main reason for this is it may have some mascara caught underneath it; therefore, it is necessary to remove it for cleaning.

How to Clean Out the Mascara Tube With Soap and Warm Water

This is the simplest process since it only requires a piece of cloth or microfibre, warm water, and soap. 

Fill a Basin or Sink With Warm Water 

After that, add one to two drops of dish soap to the warm water and swirl them around to combine them. Then, dip your mascara tube in the water until it is completely submerged. 

Keep an eye on your mascara tube until it fills up with water. Clean the rubber insert in the soapy water as well if you remove it.

Loosen the Mascara in the Tube 

You can do this by swirling the mascara wand around inside the tube once more. To loosen and bring the pieces of mascara up and out of the tube, use the wand. 

Pour one drop of dish soap immediately inside the tube and swish it around if you are still pulling out a lot of mascara with your wand.

Drain the Soapy Water 

Once the mascara is completely emptied, drain the soapy water from your sink or basin and replace it with warm, clean water. To get rid of the soap, dunk the mascara tube in freshwater. Repeat this process until there are no more soap bubbles in your mascara tube. 

This can also help clean pastry brushes, RV air conditioner filters, and screens on the porch. If you get any mascara on your hands, wash them with dish soap.

Use Rubbing Alcohol 

Pour a tiny amount of rubbing alcohol into your mascara tube, close the top, and shake it several times with the wand inside. The rubbing alcohol is used to sanitize the mascara tube and wand, which is especially important if you clean out to make room for a new product. 

You should drain the rubbing alcohol from the tube.

Sun Dry the Mascara Tube 

Set the mascara tube and wand out in the sun to dry. Remove the cap and leave it in a sunny location for about six hours. Before filling the tube with a new product, make sure it is dry. 

Put the wand in the tube and wipe it over your hand to see if it is clean. If any mascara smudges onto your hand, repeat the cleansing procedure.

If desired, replenish your mascara tube with new products. Replace the rubber component on the top of the mascara tube. Fill the mascara tube with new goods and apply with the wand. The majority of lash eyebrow serums contain natural vitamins and minerals that promote the growth of facial follicles.

How to Clean the Wand Separately

Suppose you recently acquired a new tube of mascara, and you didn’t like it, yet the wand is so good. You probably wonder if you can likewise repurpose the wand from a mascara that you do not like. Yes, you can. Follow the following steps:

1. Start by filling a sink or glass with warm water. Take the mascara wand and soak it for ten to fifteen minutes.
2. Squeeze a tablespoon of shampoo or soap into your hand and work the wand into the shampoo to remove as much mascara as possible.
3. In a different basin or sink of warm water, rinse the wand repeatedly and repeat the shampoo process until almost nothing comes off the wand.
4. Once you are sure there is no more mascara coming off the wand, give the wand one final rinse with cold water. Finalize by allowing it to dry in the air.

How Else Can You Use a Mascara Wand After Cleaning?

Surprisingly, did you know that that little mascara wand is a fantastic tool to have around? You can keep your old mascara wands and use them in your beauty routine. 

The best part is you do not have to keep the tens of mascara wands for beauty hacks only, you can also utilize them around your home, and you will see how these mere tools can go where other brushes cannot.

Combat Flying Hairs

Use a clean mascara wand to tame the flyaways. Take your hairspray and spray those flying hairs. Then use the wand to brush them down into place. This is best done with a larger mascara brush, and with time you will discover that it works more effectively than a paddle brush.

Brush Eyebrows 

An old mascara wand saves you money on adding more beauty products to your closet. You can use a clean wand to groom your brows. First, style your brows into place using a little Vaseline to bring out some structure, and then use pomade to add color.    

Exfoliate Chapped Lips

While this form of repurposing is unheard of to the majority, it is far more common than you would think. Use the wand with a bit of coconut oil or balm and sugar mix, a little Vaseline, or simply by itself and brush it repeatedly. 

Wipe the peeling skin using a tissue. The perk of using an old mascara wand is it is much softer than a toothbrush, which can be rather rough and abrasive.

Condition and Lengthen Lashes 

Castor oil is known for its antibacterial characteristics, which protect your skin from infections that lead to hair loss. Dip a clean mascara wand in a mixture of castor oil and almond oil, both high in Vitamin E and after removing all eye makeup, apply it to your upper and lower eyelashes. 

Allow the mixture to stay overnight before washing it away the next day. Within one week of treatment, you will see longer and thicker eyelashes.

Remove Cuticles

Begin by using a hydrating cuticle remover cream or simply a tiny amount of organic extra virgin olive oil. Allow it to soak in and soften the cuticles for two to three minutes. Then, using a clean mascara wand, carefully rub the base of your nails to remove any unwanted parts.

You can also use the wand to pull out the things clogging your sink, although it works best for items that are not too far down your sink’s pipe. You can also use it to clean in and around your faucet.

Closing Thoughts

Mascara tubes are great for repurposing, especially if you have a new eyebrow serum or lash, that didn’t come with a wand or a package. Recycling a mascara tube is much easier now that you know how to clean out a mascara tube.

Before embarking on a cross-country vacation, ensure your RV is in good working order. One of the aspects many people tend to ignore is cleaning or changing your RV air conditioner filter, although it is easy. Keep reading to find out how to clean an RV air conditioner filter.

How to Clean an RV Air Conditioner Filter

The air conditioner is one of the most important components that offers home-like comfort during your trip in your RV. The weather can fluctuate when traveling across states, you may find yourself using your RV AC rather frequently.

To ensure that it is supplying the cooling capacity that it is supposed to give, you must perform some maintenance on your air conditioner regularly. The most important aspect, in particular, is to ensure that the air conditioner’s filter is clean.

Steps to Clean an RV Air Conditioner Filter

One thing to remember about filters is that they can only be washed if they aren’t throwaway one-time-use filters. Your RV’s air conditioner most likely contains washable filters, but you should double-check that they can be cleaned just in case.

If your air conditioner’s filters aren’t washable, then you will have to change them. Do not attempt to wash a disposable filter because it will most likely be destroyed in the process. And it is unlikely to recover its prior efficacy.

1. Remove The Filter

Turn off the power to your air conditioner and remove the protective cover. You may need to remove screws from your RV’s AC unit, or you may only need to push tabs to open the cover. You don’t have to remove the lid fully since you may securely remove the filter while it’s half unscrewed.

When removing the filter, you should refer to your air conditioner’s user manual for specific instructions. Also, bear in mind that before inserting the filter, you should not turn on your conditioner. This is because unfiltered air will enter your RV, and debris will most likely cause major damage to your AC equipment.

2. Vacuum The Filter

Remove the filter from the RV to prevent dirt and dust from polluting the inside. Then, using a vacuum on a medium or low setting, remove visible dust and filth from the filter’s surface. Make cautious not to push too hard on the filter, or it can crack or dent.

When vacuuming the filter, it may appear that there isn’t much dirt coming off of it. This is likely if the filter hasn’t been significantly polluted. You should still vacuum the filter thoroughly to make the subsequent stages simpler.

On the other hand, don’t expect to be able to remove all of the dirt from the filter if it is too unclean. Before going on to the following phase, suck up as much as you can. You may be able to vacuum the filter without doing any major cleaning regularly. However, this will only work if the filter is free of difficult grit.

3. Wash The Filter

If you believe that vacuuming your filter has not sufficiently cleaned it, you should wash it. Begin by filling a jar halfway with lukewarm water and a little amount of mild detergent. To get a thick lather, combine the water and detergent. In some cases, you may choose to use the bathtub in the RV shower as a container. However, avoid using strong cleaning solutions since they can easily harm the filter.

Submerge the filter in the cleaning solution and move it about to ensure that it is thoroughly coated by the soapy solution, then allow it to soak in the water for 10-15 minutes. If the filter is really dirty, let it soak in the solution for 1-2 hours, or longer if required.

You may also use a soft brush to gently remove the gunk from the filter. However, cease using abrasive instruments since they can easily harm the sensitive surface of the filter. Alternatively, you can hose both sides of the filter until only clean water drops out but avoid using a pressure hose nozzle since it could destroy the fragile filter.

If you’re washing it in the RV shower, you may rinse the filter with the detachable showerhead.

4. Deal With Bacteria

After you’ve cleaned the filter of dirt and grime, it’s time to get rid of the germs that are most likely flourishing on it. Prepare a vinegar and water solution with the components in equal quantities. Fill a spray bottle halfway with the solution and spray both sides of the filter.

Allow the filter to settle for approximately 10 minutes before rinsing it with running water. If you have the necessary equipment, you may hose down your filter. This process can also help clean tinted house windows, tile countertops, fish tank gravel, and brick floors.

5. Dry The Filter And Place It Back

Reinstalling the filter in the AC when it is wet is a poor idea. Allow it to air-dry for several hours before reinstalling it in the AC. If you have a rack, you may position it outside the RV in a clean area and place the filter on top to dry. If you don’t have a rack, throw some dry newspapers outside the RV and position the filter on top of them against a wall.

After a few hours, when you are certain that the filter is dry, replace it in the AC and replace the lid. You should now be able to enjoy clean, uninterrupted airflow in your RV.

Why Should You Clean the RV Air Conditioner Filter?

An air conditioning device operates by drawing warm air in from the outside, often through an input aperture. The outside air brings with it the dust, pollution, allergies, and particles that it contains. Even the purest mountain air contains dust and pollen.

Most unpleasant materials from the outdoors are kept out of your camper by air conditioner filters. These particles accumulate within the filter while it performs its function. The screen will eventually reach a breaking point. If it is never cleaned, the filter will produce one of two outcomes.

• The screen becomes blocked to the point that no air can pass through it.
• The air conditioner flow will be feeble and ineffective, or the filter will not be completely clogged but will become saturated to the point where it will no longer be able to keep the undesired materials out. In this case, the air conditioner is still operational, but it is pushing dirty air through your RV.

Failure to maintain your RV’s air conditioner filter results in not only health problems but also its ducting and the air conditioner itself. At best, you’ll notice an accumulation of particles in the ducts. At worst, it might cause the AC unit to malfunction or worsen health problems such as allergy or asthma symptoms.

Tips on Maintenance of an RV Air Conditioner Filter

After cleaning your air conditioner filter, do not put it back in and forget about it for several months. You should keep the filter in good condition before your next cleaning session to ensure that it lasts as long as possible and that the air conditioner provides the required cooling performance.

Here are some pointers on how to care for your air conditioner’s filter in between cleanings.

Use the AC’s Automatic Cleaning Function

Use the auto cleaning function on your RV’s air conditioning unit if it has one. AC units with this feature employ an internal brush mechanism to clean the filter. The dust is then collected in a tiny chamber and eventually blown outside.

However, you should not rely on your RV’s air conditioner’s built-in auto cleanup feature to replace routine cleaning. It will only assist the filter to stay clean for a longer period, but it will not be able to handle difficult contaminations.

Regularly Clean Your AC Filter

This is a self-evident tip. You should clean your air conditioner’s filter regularly. Consult the user handbook for your air conditioner to determine how frequently you should clean the filter.

Some manufacturers recommend cleaning AC filters every 30 days, while others advocate cleaning them every two weeks. You should clean your RV AC unit more often if you have pets or allergies.

Replace the Filter If Necessary

Every RV AC filter has a limited lifespan, and you won’t be able to clean it indefinitely. There will come the point when the AC filter is no longer usable.

In most cases, it is simple to detect wear in AC filters. Replace your filter if you see any holes, rips, or other damage to it. It’s a good idea to bring a couple of spare filters with you on the trip, but you shouldn’t have any trouble finding one at a nearby home appliances store.

Run the AC Only When Necessary

Finally, only use your RV’s air conditioning equipment when necessary. Not only will this reduce the rate of pollution in the AC, but it will also help you to save RV electricity. Even if you have lots of spare electricity, turn off the air conditioner while not in use.

Frequently Asked Questions

Does Cleaning AC Filter Make The RV’s Airflow Colder?

A clean air filter does maintain a cool airflow. A clogged filter causes poor cold airflow in your RV’s air conditioning system as a result of the buildup.

What is the Best Alternative for Cleaning RV AC Filters?

If you don’t have access to a commercial cleaner, a moderate detergent and warm water solution would suffice. All you have to do is combine the ingredients in a spray bottle, hand sprayer, or garden sprayer and apply them to the RV’s air filter.

Conclusion

If you are unfamiliar with basic HVAC systems, you may have been unaware of the air filter until now. If it is your first time buying a contemporary recreational vehicle, you should know how to clean an RV air conditioner filter to make every voyage more pleasurable.

Anyone can agree that screened-in porches are an excellent way to enjoy the outdoors. They keep pests and rain out while allowing sunlight and wind in. It’s critical to maintain your porch’s screens clean if you want to get the most out of it.

Let’s talk about how to clean screens on the porch.

How to Clean Screens on a Porch

To clean screens on the porch, you first need to vacuum to remove the fine particles built up on the screen. Then, follow it up with wet cleaning to remove even more dirt. 

So, when should you clean the screens on your porch? The answer is simple; whenever it’s time for a thorough porch cleaning. These include the beginning of spring, end of autumn; during cleaning days, you can group them to clean into one block of time rather than having to handle the tasks several days or weekends in a row.

Noting that screens act as a filter for your enclosed porch, you should keep them out of much of the dirt, debris, and pollutants that might otherwise cover everything. Unfortunately, this same filtering action results in an abundance of pollen and fine particles trapped on and in the screen itself.

What Do You Need to Clean Screens on Porch?

• Vacuum with upholstery brush and crevice tool attachments
• Step stool or ladder
• Garden hose
• Soft-bristled brush
• Bucket of warm water
• Mild dish soap
• Distilled white vinegar, although this is optional
• Spray bottle, although it is optional

Instructions

The procedure you adhere to when cleaning your porch screen depends on how dirty your porch screens are.

1. Clear away all debris. Move any trash from the edges of your room to the middle of the screened-in area with a tiny leaf blower or little vacuum cleaner. Remove any loose dirt found through the screen apertures or any screen doors using a broom and dustpan.
2. Vacuum porch screens. Begin vacuuming from the outside if you can securely reach the external surface of your porch screens. Otherwise, use a vacuum attachment with an upholstery brush to dislodge dirt from the interior of your porch screens, begin at the top and work your way down. To access the highest spots, use a step stool or ladder if needed. Next, vacuum the corners and edges of the screens using the crevice tool attachment.
3. Wet screens with a hose. Start this step by moving any items you don’t want to get wet, such as furniture or rugs, away from the screens. Then from inside the porch, use a hose to rinse debris from each screen panel. As you make your way over and down, direct the spray outward.
   
   A pressure washer may also be used to clean a screen porch, but be careful not to rip holes in the screen. However, it is recommended that if you want to minimize damage, use the lowest pressure setting and stay several feet away from the screen if you choose to use a pressure washer.
4. Scrub with soapy water. After vacuuming and hosing down the screens, use soapy water to spot-clean any spots that remain unclean or discolored or to wipe the whole surface completely. In a pail of warm water, combine a few squirts of mild dish soap. Next, gently scrub the interior of the screen with a soft-bristled brush dipped in the solution.
5. Remove the accumulated mold from the porch’s screens. Porch screens in damp areas are susceptible to the growth of mold and mildew. In a spray container, use equal parts distilled white vinegar and water to remove mold off porch screens. Using a soft-bristled brush, gently scrub the screens with the solution.
6. Rinse porch screens clean. Once your porch screens are clean, use your hose to rinse away any residual cleaning solution. Again, start from the interior of the porch and work your way out. Allow the screens to dry entirely before reintroducing furnishings to your porch.
7. Clean the cushions on your patio furniture. Dandruff, dander, and other allergens can become lodged in the screen. Fortunately, this is the most straightforward step: simply remove your cushions and place them in the washing. If you carefully clean the patio screens, you should only perform these procedures once a year.

Precautions to Observe When Cleaning Screens on Porch

A porch transforms your exterior area into a private retreat where you can stare across the yard and up at the lovely sky. In an ideal world, you’d never have to gaze through streaks or unclean areas. Cleaning your patio screen enclosure may need some effort, but the appropriate tactics make this backyard job easy.

• If you don’t have a water hose but have a pressure washer, make sure it has a low enough setting to avoid damaging the screen. Also, if you pick this equipment, stand five to seven feet away from the window to lessen water pressure.
• If you want to clean your porch’s screens quickly without removing them, use a vacuum. The suction force of the vacuum may be pretty effective in removing dirt, grime, and other particles from the screen.
• Consider utilizing a spray-on cleaning if the dirt on your displays is more filthy than dusty. Spray the solution on the screens and wipe it away with a brush or sponge. The brush has the advantage of allowing the bristles to poke through the perforations in the screen rather than remaining on the surface.

Tips to Maintain Porch Screens Clean

After cleaning the screens on your porch, do not forget to clean them again regularly. You should maintain it in good condition before your next cleaning session to ensure that it lasts as long as possible and that you enjoy the beautiful skies.

Here are some pointers on how to maintain your porch’s screen in between cleanings.

Don’t Forget About the Walls

It is also critical to keep the region in good condition. First, sweep cobwebs and dirt off walls and ceilings with a corn broom, then use a big polyester sponge to wash down the walls with an all-purpose cleaner and water solution.

Stick To the Limits

Don’t try blasting your way to bright, clean patio screens unless you’re acquainted with high-pressure spray tools. Most garden hose spray attachments will do the job without drilling holes in the enclosure materials.

Cleaning Time Is the Best Time to Remove Pet Smudges

If you have a pet, chances are they’ve left some nose streaks on your windows and sliding glass doors that you’ll need to clean. You may do this with hot water and paper towels – and in many cases, no glass cleaner is necessary!

Simply clean the area with a damp paper towel and then dry it with a dry paper towel. If you prefer or detect streaks or glare after cleaning, you can use a regular glass cleaner.

Cover Your Furniture and Porch

During pollen season, cover all outdoor furniture with plastic. This will keep the furnishings dust-free. Consider putting up vinyl drapes within screened-in patios.

Painter’s drop cloths can also be used for this purpose. Both are simple to clean.

Prevent Pollen Accumulation

Depending on where you live, pollen might be a huge concern for your porch screens. The most straightforward approach to keep pollen out is to make a curtain to put outside the screens. This allows you to close the curtains while not using the porch and open them when you want to enjoy the great outdoors.

Repaint Your Porch’s Floors and Walls

Painted wood porch floors and stairs look better and stay longer. Paints designed mainly for porches and floors are latex or oil-based, self-priming, and long-lasting. Painting a porch floor is the same as painting any other surface.

Frequently Asked Questions

Is It Possible to Power Wash a Screened-in Porch?

A power washer may be used to clean a screened-in porch, but be cautious not to damage or punch holes in the screen. This can occur if you apply too much pressure or place the nozzle too close to the screen. The good news pressure washers can remove all dust, filth, and pollen from the screens.

How Do You Remove Mold From a Porch Screen?

In a spray bottle, combine warm water and white vinegar in a half-and-half solution. To eliminate any obstinate mold, spray the screens with the solution and clean them with a scrub brush or a scrubbing sponge. This can also help clean tinted house windows, tile countertops, fish tank gravel, and brick floors.

How Can I Keep Dirt From Getting on My Patio Screen?

During pollen season, cover all outdoor furniture with plastic. This will keep the furnishings dust-free. Also, consider putting up vinyl drapes within screened-in patios. You can also use painter’s drop cloths for this purpose.

How Do I Clean Pollen off My Porch’s Screen?

To clean pollen from your porch’s screen, you can use a handheld vacuum, power washer, or all-purpose cleaner. Use a bristle brush, toothbrush, or cloth to apply the all-purpose cleaning. The essential thing to remember while cleaning pollen from window screens is to avoid applying too much pressure to the screen.

Summing Up

Cleaning the screens on the porch may be straightforward and effective if you follow our step-by-step instructions. However, when cleaning your screen, always take caution because the material might rip or be pierced. We recommend against utilizing powerful high-pressure spray equipment to minimize inadvertent harm unless you are comfortable with it.