How To Clean Billiard Balls

Billiard balls in a rack

Billiards is a popular game, and cleaning the billiard balls is essential to ensure that you have a good game. In addition, periodic cleaning of the balls ensures that your board stays in good condition for a long time. Here you’ll see how to clean billiard balls.

How To Clean Billiard Balls

By the primary thrust mechanism of billiards, there should be a frictional co-efficiency between the balls. Also, dirty billiard balls increase wear and tear and do not guarantee good co-efficiency. Therefore, before learning how to clean the billiard balls, it is essential to know why do we need to clean them in the first place.

Person aiming the cue stick to hit a ball

Why Clean Billiards Ball?

With time and usage, the billiard balls acquire dirt and may not travel as smoothly as they did when brand new. Cleaning helps to restore the balls to their former state.

  • If the billiard balls aren’t cleaned periodically, they accumulate chalk dust. As a result, they cannot be used for long and needs to be replaced soon. Cleaning helps to increase the longevity of the balls.
  • Cleaning the billiard balls periodically helps you save money in the long run. Without cleaning, the balls will be rendered useless, and you will need to buy a new set of balls.
  • Cleaning the billiard balls regularly helps to protect your feet as well. If the ball isn’t clean, your felt may accumulate dirt, and then you will have to clean it as well.

Things Not To Use For Cleaning Billiard Balls

Billiard balls are expensive sporting goods, and you must choose the material you use for cleaning them wisely. Here are some things you should not use.

Dishwashing Liquid

Dishwashing liquids are readily available, and you may find it lucrative to use for cleaning. However, they should strictly be avoided.

  • Billiard balls are made from a blend of polyester and resin or phenolic resin, which are very sensitive to heat.
  • The heat generated by the dishwashing cycle has adverse effects on both the surface and the interiors of a billiards ball.
  • Even a little dishwashing liquid can make the surface of the billiards ball look dull and make it less durable.

Household Bleaching Agents

Some people may recommend the use of household bleaching agents as an easy method of cleaning. However, their chemical composition makes them unfit for the process.

  • Common bleaching agents may decolorize the balls and give them a very unattractive appearance.
  • Agents like CLR may cause yellow spots to appear on the balls. Other bleaching agents may render the ball with some white patches and decreases its durability.
  • Toothpaste should not be used either as it can cause some unwanted residue to form on the surface of the balls, which can’t be washed away by water.

Items Required For Cleaning

After seeing what items not to be used, we now see what should be used to clean billiard balls. 

  • A bucket of warm water
  • Detergent
  • Microfiber cloth
  • Baking Soda

An Aramith billiard ball cleaner kit is handy for this purpose. However, do not go for cheap products as it may cause permanent damage to the balls. 

Depending on the material of your billiard balls, wisely choose the cleaning kit you buy. Also, buy a proper balling-keeping case so that the balls don’t acquire dirt. This ensures the cleaning process is not very cumbersome.

Billiard balls in a rack

Step 1: Dusting

Now that you know the do’s and don’ts of the cleaning process, it is time to see how to proceed with the cleaning procedure.

  1. The first step towards cleaning the billiard balls involves removing all dust particles that might have settled on the surface of the billiard balls.
  2. With the help of a microfiber cloth, wipe the surface of each ball carefully. Be gentle while wiping.
  3. If you wipe too fast, there are chances that scratches might fall on the surfaces of the ball, which are very difficult, if not impossible, to remove.
  4. Make sure the microfiber cloth you use is properly dried. Any amount of moisture on the cloth can cause the dirt particles to attach firmly to the surface of the balls.

Only after dusting the billiard balls properly should you move to the next step. Wipe the balls multiple times till you are convinced it is dust-free.

Step 2: Soak The Balls In Water

Now that all the billiard balls are adequately dusted, and all settled particles are removed, it is safe to use water for cleaning purposes.

  1. Take a bucket full of warm water, not too warm to damage the billiard balls, and sprinkle some detergent in it. Stir it to make the solution uniform.
  2. You can use hot water if the billiard balls are not made of acrylic or polyester. If the water is too cold, the particles adhering to the ball’s surface will not loosen up.
  3. The detergent you use should not be too strong. Use detergents that are used to clean linen or other such delicate fabric.
  4. Soak the billiard balls in this solution for at least five minutes. You can then soak them for some time in room water as well.

Take the balls out and properly dry them before moving to the next step. Again, keep it under sunlight if possible to ensure proper drying.

Step 3: Remove The Yellow Stains 

After the ball has been cleaned with warm water and dried properly, it is time to remove stain marks from its surface, if any.

Over time, the balls accumulate rust and turn yellow due to a redox reaction with the atmosphere. This makes them lose their initial appeal, and it needs to be restored.

  1. Add a small amount of baking soda to a small bowl, and then add some water. Mix it properly and keep on adding both components till the paste is thick.
  2. Apply small amounts of this paste on the yellow spots. Rub them gently with the microfiber cloth taking care that you do not scrape paint from the surface.
  3. Rewash the balls with cold water and do not allow any paste to accumulate on the surface of the balls.
  4. After washing the paste off, dry it thoroughly. Any moisture on the ball can damage your billiards board.
Newly cleaned billiard balls stored in a box

Step 4: Polish

Everyone likes their billiard balls nice and clean. The shine on it is something that makes it stand out. However, to sustain this shine for long periods, you need to polish it.

  1. Be careful about the material you choose for polishing. Remember, oil should not be used for polishing.
  2. No matter how well you dry the balls, they will accumulate dirt if you use oil to polish them.
  3. Wax should also be avoided as it can damage the ball’s surface and has some adverse effects as oil.

The Aramith billiard cleaning kit comes with a polish tool that should be used for polishing. This article has more details on cleaning billiard balls.

Step 5: Store The Billiard Balls Properly

After the cleaning process is complete, you need to store the billiard balls to accumulate dirt quickly.

  1. Do not leave the balls on the table after the game is over. If the balls stay stationary for a prolonged period, they are more likely to accumulate dirt.
  2. Do not leave the balls inside the pockets as well. The balls should be kept at a place that has exposure to the external world.
  3. You should buy a ball-keeping case specially designed to keep the billiard balls after a good game.
  4. Hang the case upon a wall or in any place that is not within reach of children. The billiard balls are made of fine material and can get damaged if not treated with care.

After a good game, storing the billiard balls properly may call for some extra effort, but it is worth it if you want to enjoy more such games in the days to come.

This video on how to clean billiard balls helps you understand the process better.

Frequently Asked Questions

Is It Difficult To Clean Billiard Balls?

No, cleaning billiard balls should not be a difficult job. All you need to carry out the process smoothly is a bit of patience. If you are careful with the choice of material for cleaning and systematically, the process is hassle-free.

How Frequently Should Billiard Balls Be Cleaned?

Depending on how much care you take while storing the balls, the number of times you need to clean the ball shall vary. You should wipe the balls with a microfiber cloth after each game and store them. If you take reasonable care, cleaning the balls once in two months shall be enough.


Cleaning the billiard balls is not half as enjoyable as playing a game with them. However, cleaning them once in a while can help you have many pleasant moments on the billiards board. Thus, cleaning the billiard balls should be done systematically and carefully to ensure their longevity and smooth functioning.

How To Clean A Paint Ball Gun

Person holding a paintball gun in need of cleaning

Paintball is a fun game to play, and taking good care of your paintball gun helps you enjoy your game to the fullest and improves the performance significantly. But, cleaning it could be a lengthy and time-consuming process, and it’s critical to follow the proper method. Here you’ll see how to clean a paintball gun.

How To Clean A Paintball Gun

Paintball guns are a pretty big investment, so it’s good to know how to clean and maintain it well. You really don’t want to wait to clean till all the parts are jammed and you need to replace them all. Let’s bust some myths and share a few maintenance tips before we begin with the cleaning process.

Maintaining The Gun

While cleaning the gun periodically is necessary, some measures help to ensure the longevity of your gun.

Man playing paintball while wearing full gear
  • Polish the external body of the paintball gun with a squeegee. Do this once a week so that cleaning becomes easier when you do it.
  • Use cotton swabs to polish the small crevices on the gun which the squeegee cannot reach.
  • Dip a toothbrush in warm water and use it to clean any clogged impurity that remains on the surface of the gun.
  • Dry the surface with a paper towel and then clean the grip frame. The frame needs to be cleaned after every game as it accumulates paint during every game.
  • Check the battery and replace it if needed. Wipe the battery to remove any dust that has accumulated.
  • Check the different parts of the paintball gun and replace any part you find faulty.
  • You can use a small brush dipped in warm water to reduce the scrubbing needed. These steps can ensure your gun remains clean externally.

To clean the paintball gun thoroughly, you have to follow the steps we talk about next.

Tools Required

  • A paintball gun squeegee
  • A paintball gun barrel swab
  • A paintball gun lubricating oil
  • Some Q-tips
  • A toothbrush
  • Some paper towel
  • Some warm water

You can also choose to buy a paintball cleaning kit which contains everything you might need to clean the gun. To use them, refer to any user instructions that come with the kit. 

Step 1: Remove The Air Tank

The air tank of your paintball gun contains mainly carbon dioxide and can be a source of a potential fire.

  1. Before cleaning the paintball marker, make sure to remove the air tank so that you are safe. This eliminates any chance of an accident in the process.
  2. Search for a small knob that attaches the air tank with the gun and press it to remove the tank.

All paintball guns come with a degas function that’s easy to use. This step ensures that there are no misfires during cleaning.

Step 2: Disassemble The Gun

Different manufacturers have different ways of manufacturing a paintball gun. Therefore, it is wise to have a user manual while disassembling the gun.

The gun has several parts which need to be cleaned individually. These include a grip frame, a barrel, a hopper, and a bolt and hammer.

Person holding a paintball gun in need of cleaning
  1. The place where you clean the paintball gun should be clear not to misplace the parts you remove from the paintball gun.
  2. Keep the removed parts safely, and if possible, click pictures of the gun after you disassemble any part. This makes reassembly easier.
  3. Do not disassemble the trigger assembly as it is very sensitive and difficult to reassemble. The spring may loosen, affecting the gun’s performance.
  4. If you have pets or small children at home, don’t allow them to come to the work area as it may cause an accident.

Step 3: Clean The Gun’s Barrel

The first of the gun towards which you need to direct your attention is the gun’s barrel.

  1. The tiny dust particles that accumulate on the barrel can be removed using a paintball gun barrel swab and warm water to rinse out any external debris.
  2. Scrub the barrel to ensure no dust particles are remaining on it. If any impurity remains, you can use a squeegee. 
  3. Hook the gun on a ring and suckle its other end so that all impurities get cleaned. 
  4. If the manufacturer permits the use of a cloth, use it to clean the gun’s body. 
  5. The remaining choked areas of the gun can be cleaned using Q-tip; this clears any jamming that might have accumulated over time.

This article has more information on cleaning a paintball gun.

Step 4: Clean The Bolt And Hammer

The bolt and hammer need to be cleaned without using moisture. Water can cause them to rust and hence cause permanent damage to these parts.

  1. Polish the bolt and hammer with a paper towel and then carefully dry them. 
  2. Examine the O rings and check for any signs of wear and tear. If any such signs exist, you have to clean them regularly to keep the gun usable.
  3. Use Q tips to remove any debris that might remain on the O ring. If the O ring is excessively worn out, it needs to be replaced.
  4. The O rings should cover the air tank completely.

After you have completed the cleaning process, make sure you dry the parts under sunlight. This prevents any chance of bacterial growth that can potentially damage the paintball gun.

Step 5: Lubricate The Paintball Gun

Make sure that the oil you use to lubricate the paintball gun is suited for the purpose. Using incompatible lubricants can cause severe damage to the gun.

  1. Ensure that all the parts of the paint gun are properly dried up. Applying oil on wet surfaces serves no purpose and can even cause damage.
  2. Use the best possible oil for lubricating purposes as it goes a long way in maintaining and even improving the performance of your paintball gun.
  3. Make sure you pour the perfect amount of lubricant. Too much oil can cause the surface to get even rougher, while too little doesn’t improve the performance at all.
  4. Pour some amount of oil on the O-rings as these are the most critical parts of the gun.
Person holding a paintball gun in the middle of a game

Step 6: Reassemble The Gun

After you have cleaned all the interior parts of the gun carefully, it is time to reassemble the gun and test if it is ready to use.

  1. Before putting all the paintball gun parts back together, you must check all the parts are in perfect condition and ready for use.
  2. Constantly refer to the pictures you clicked during disassembly to ensure that the reassembly process happens in an error-free manner.
  3. In case any part is damaged, do not hesitate to remove it. Using a gun that’s not in perfect condition can considerably increase the risk of injuries.

This video on how to clean a paintball gun will help you understand the process better.

Step 7: Store The Gun

After you have reassembled the gun after cleaning, you need to ensure you store it properly to remain clean for a long time and is ready for use when you need it.

  1. Make sure the paintball is unloaded before you store them to avoid any risk of injuries.
  2. Empty the air tank after removing the canister.
  3. To prevent any damage to the spring’s trigger, pull it back and check if it has enough room for movement.
  4. The safety cap should be in place before storing the gun.
  5. To avoid damage to any part of the gun, add some oil to it before storing it.
  6. Make sure you have a repair kit available at home, as using the gun without repair can cause permanent damage.
  7. The paintball gun and the canister should not be kept together. Store them in different cabinets if possible.
  8. The place where you keep the paintball gun should not be accessible to children.

Frequently Asked Questions

How Frequently Must A Paintball Gun Be Cleaned?

Ideally, you should clean it after every use. Every time you play a game of paintball, your gun acquires some amount of dirt. The external portions accumulate more dirt and need to clean after every game to keep them in good condition.

You can open the gun and give it a clean whenever you feel its performance is degrading.

Is It Difficult To Clean A Paintball Gun?

The only difficulty one can face while cleaning a paintball gun is during the disassembly and at the time of reassembly. If you follow all the user instructions carefully and do not misplace any part, the cleaning process is very simple and can be completed easily.

Is It Expensive To Clean A Paintball Gun?

No, it’s not very expensive to clean a paintball gun. All the needed items to clean a paintball gun can be obtained by simply buying a paintball cleaning kit. The price of the kit is worth it as you can use it for an extended period.

You can also use some household items for regular cleaning, and thus cleaning the gun is relatively economical. 


The only thing you need to enjoy in a good game of paintball is a paintball gun. Cleaning it regularly helps you become a pro in the sport and makes your weekend colorful. If you follow all the steps and do the cleaning a little patiently, your paintball gun will be as good as new for a long time.

How To Clean A Tanning Mitt

The self-tanning mitt is one of your most trusted companions that help you achieve great skin and retain an elegant glow. The tanning mitt is entirely hand wrought and lasts long if you clean it properly and often. In this article, let’s see how to clean a tanning mitt.  

How To Clean A Tanning Mitt

Cleaning your tanning mitt is crucial, given that it not only prolongs the life of the mitt but also leaves you with a streak-free, smooth tan. Regardless of the quality of tanning mitts, they should be replaced every three months ideally. But some users vouch for its quality even after six months to one year of usage.

Step 1: Materials Required

To clean your tanning mitt, all you require is a bowl, some warm water, and any delicate liquid soap.

Step 2: Give It A Good Wash

  1. Take a bowl of lukewarm water and pour some liquid soap, and mix it well. 
  2. Immerse the mitt in the solution and let it soak for a few minutes. 
  3. Once it has soaked well, gently rub and caress the mitt and wash it directly with regular tap water. 
  4. This would eliminate all the stains from the mitt. Repeat the same step thrice to get better results. 

Beware of using any harsh cleaning solutions, and they are inappropriate for cleaning tanning mitts. 

Step 3: Let It Dry

After the washing session, the mitt needs to be adequately dried, removing all moisture from it. 

  1. While it is damp, you need to twist and squeeze the mitt to remove the excess water. 
  2. Once you remove the excess water, place it in a well-ventilated area. But avoid hanging it or putting it directly under sunlight. 
  3. Let it air dry.

You might place the mitt in a less humid place like your deck, for quick drying or hang it outside to air dry will extend their usability period without causing any damage to your mitt. 

Step 4: Replace The Tanning Mitt

Generally, a tanning mitt can last up to six months and a maximum of up to a year when they are well maintained.  

If you happen to use it more frequently, it is better that you should replace your tanning mitt after every three months of use. 

Here is a video guide to clean a tanning mitt. 

Methods And Tools To Avoid

  1. Strictly avoid using harsh soaps 

Tanning mitts are entirely hand-made, so using a harsh soap or detergent to clean will ruin its quality. 

Therefore, all you need is some delicate detergents or soaps to clean the tanning mitt and remove the tanning solution. 

  1. Keep it away from washing machine 

Tanning mitts should be washed by hands always. You cannot clean it in a washing machine with other garments like your socks, as the garments may end up with stains from the tanning solution. 

  1. Do not dry it using a dryer 

Never use a dryer to dry up your tanning mitt. Using dryers for drying your mitt can shrink and can be potent enough to break it. Always air dry your tanning mitts. 

  1. Reshape after washing 

When it’s still damp, you need to wring out the excess water and try to reshape it as hard as you can. 

Reshaping it reduces the risk of getting deformed. Once the self-tanning mitt gets deformed, there is no other go but to replace it. 

  1. Wash your mitt after every use 

You should never forget to wash your mitt after every use. Cleaning it after every use prevents the stains from setting in. 

Frequently Asked Questions

How Long Will My Tan Last?

It is expected that the tan will last approximately nine days. This entirely depends on how often your body sheds its skin cells. To make your tan lasts for a good amount of days, you can moisturize your skin daily and practice showering in lukewarm water. 

Why Do Tannings Mitts Turn Green?

The tanning mitts turn green because they cause a natural reaction. The green is the base in most of the tanning solutions. Therefore, you are assured that it is not mold if you don’t compromise cleaning your mitts after every use. 

When Is It The Best To Use A Tanning Mitt?

You can use your tanning mitt anytime you like. Although, you might want to apply the mitt in the early hours of the day to prevent smudging of your pillows, or waking up with blotches. 

The tanning works the best when it gets sufficient time to develop your skin and does not blotch. But be careful not to inhale the solution as it can be pretty dangerous. 

How To Use Your Self-Tanning Mitt?

To use the self-tanning mitt, all you need to do is apply the product to the mitt and gently glide it along your skin. Or you can apply the product first and then use the mitt to smooth it on your skin. 

Don’t rub the lotion directly on your skin; just glide it in a gentle circular motion. 


The tanning mitt is similar to a glove and is specially designed to protect your hands from getting stained with sunless tanner and helps in applying tanning lotion and creams. These products can last a long time if maintained well. 

Here, you have all the necessary information regarding how to clean your tanning mitts. Make sure you don’t use any harsh cleaning compounds or put them in the washing machine. 

You will get the best results when you hand clean it. 

How To Clean Adidas Suede Shoes

Adidas suede shoes

Adidas suede shoes are very popular footwear and are loved by almost everyone. Not only does it provide the utmost comfort, but it also adds a decent brand value, apart from a superior taste. In this article, you will see how to clean an Adidas suede shoe.

How To Clean Adidas Suede Shoes

Suede shoes can be tough to clean, given that it is the bottom-side of leather and is absorbent in nature. So, it grabs every drop or spill that comes its way.

Suede Adidas shoe

Method 1: Use A Suede Cleaning Kit

This method involves using a cleaning kit containing a suede cleaning eraser and a crepe brush for cleaning, which can actually be used to clean moccasins as well.

  1. Use a water spray bottle to moisten the surface of the shoe before you begin to clean with your suede cleaning kit.
  2. After that, use the crepe brush to remove all visible stains from the shoe. Rub it slowly to loosen all dust particles.
  3. Now, it is time to use the suede cleaning eraser, an effective tool for cleaning shoes.
  4. It’s a sensitive cleansing utility and be gentle while using it. Reduce friction while using it and apply moderate pressure.
  5. Alternately keep using the eraser and cape brush until all stain marks are removed from the surface of your Adidas suede shoe.

No matter which brand the suede shoes are from, it’s essential to follow the right cleaning method.

Method 2: Use White Vinegar

Food stains on your shoe can tar their appearance and is difficult to remove using traditional cleaning techniques. The acetic acid in vinegar can come to your rescue.

For this method, you’ll need vinegar, including some amount of warm water, some clean cotton cloth, and a suede cleaning brush.

  1. Take a container and pour two cups of warm water and one cup of white vinegar. Stir it well to ensure the liquids are uniformly mixed.
  2. Take a clean cotton cloth and dip it in the solution. Make sure the cotton cloth is clean and keep it dipped for about ten to fifteen minutes.
  3. Apply the soaked cloth on the visible stains and scuff marks. Scrub them gently, ensuring that you don’t damage the material of the shoe.
  4. Start with the smaller stain marks and then move towards the bigger ones. Once you have cleaned it, let the shoe dry for some time.
  5. If there are any marks still visible, clean them using the suede cleaning brush.
Toothbrush with toothpaste

Method 3: Use Toothpaste And Toothbrush

Apart from our dental routine, the basic nature of regular toothpaste helps to clean stain marks on your Adidas suede shoes as well.

The other things required are a soft bristle toothbrush, a clean cotton cloth, some warm water. The toothpaste you use should be white.

  1. Use a warm water spray to get the surface of your shoe moisturized adequately before you begin cleaning with the toothpaste.
  2. Identify the areas of the shoe that require cleaning and apply toothpaste to those areas. Be careful about the amount of toothpaste you use.
  3. Spread the toothpaste uniformly over the stain marks using a toothbrush having soft bristles. The soft bristles reduce the chances of damage to the shoe.
  4. Rub with the brush and check continuously if the stain marks are removed. Repeat the process till satisfaction and make sure to use the brush gently.
  5. Then take the soft cotton cloth and dip it in some warm water. Use this cloth to remove the remaining white toothpaste from the surface of the shoe.
  6. After this, dry it properly. It is recommended to dry the shoes under sunlight as it can kill any potential bacterial growth.

Method 4: Use Rubbing Alcohol 

Rubbing alcohol is an effective cleaning agent and can be used to clean the suede shoe.

You should also keep a suede eraser and some cotton balls by your side for this process.

  1. Check the shoe for parts that are most dirty as they need to be cleaned first. Once you have identified them, apply to rub alcohol on those parts.
  2. Instead of directly rubbing alcohol, use some cotton balls to dip in the rubbing alcohol and use them.
  3. Rub the cotton balls gently on the stain marks until they have vanished.
  4. If there are any remaining dirt marks, you can use your suede eraser to get rid of them.

This method is best suited for cleaning ink stains or mud marks.

Adidas suede shoes

Method 5: Use Cornstarch

Cornstarch available in your kitchen can be used to clean your Adidas suede shoe. It shows the best results when you need to remove oil or grease stains from your shoe.

  1. Take some cornstarch powder and sprinkle it over the surface of your shoe. Make sure the shoe is adequately covered and let it stand for about 24 hours.
  2. After the powder has stayed on the shoe for long enough, you need to use a suede clean brush to remove all the shoe’s oil stains and grease marks.

While traditional cleaning methods find it difficult to remove oil stains, this process is simple and effective. It also removes foul smells coming from the shoes.

Here’s a video guide to help you with cleaning Adidas suede shoes.

Frequently Asked Questions

How Frequently Should An Adidas Suede Shoe Be Cleaned?

How frequently you should clean an Adidas suede shoe depends on how often you use it and in what conditions. Applying too much water on it can damage it, and hence you should take care about how often you wash it. Cleaning the shoe once in two months should be enough for moderate users.

Is Cleaning An Adidas Suede Shoe Expensive?

Most of the items you need to clean your Adidas suede shoe are items of daily use. The suede cleaning kit lasts for a long time after buying, and you can use it for other suede products. It is a reasonable expense considering the potential of long-term use.


Adidas suede shoes are a great item to wear on suitable occasions. With time, it naturally gets dirty, and cleaning it can make it look brand new. The cleaning process is simple, and if done with care, you will have an excellent time using your footwear.

How To Clean Fabric Headboard

Bed with fabric headboard

After a day filled with hard work, sound sleep is essential for staying healthy. While the bed you sleep on plays a critical role in how well you sleep, a headboard adds to the bed’s aesthetics. In this article, you will see how to clean a fabric headboard.

How To Clean A Fabric Headboard

The dirt build-up on fabric headboards could be due to various reasons, like the natural oil from hair and skin, pet fur, or even makeup, making them look dull and grimy with time. Similar to body pillows, bedsheets and pillowcases, fabric headboards need regular cleaning too.


Materials Required

  • A fabric protector spray
  • The detergent used for laundry
  • A clean piece of cloth or a rag
  • A bucket
  • A spot cleaner spray 
  • A vacuum cleaner
  • A blow dryer, if available

Step 1: Use Fabric Protector Spray

This is both a preventive and a cleaning measure. Doing it at the outset can save your headboard from many undue spots and reduce the efforts needed while cleaning.

  1. Use newspaper to cover the non-upholstered surfaces before applying the fabric protector spray to avoid damages caused by potential over spraying.
  2. Next, test if the spray is damaging the color of the fabric on your headboard. Apply a small amount of the spray to a part that is not easily visible.
  3. Rub it vigorously with a piece of cloth and ensure no color comes out before you can proceed further.
  4. Once you are satisfied with the quality of the spray, apply it uniformly over the entire surface of the headboard.
  5. After this initial spray has completely dried up, apply a second coat.

Applying this protector spray ensures that your fabric does not accumulate much dirt and is easier to clean.

Step 2: Use A Vacuum Cleaner

After initial cleaning has been done using the fabric protector spray, you can begin using the vacuum cleaner for further cleaning.

  • To suck off all the dust from the headboard, use the upholstery attachment on the vacuum cleaner.
  • Dust is more likely to accumulate near the buttons or any cracks that might have developed on the headboard. Take care to clean them properly.

If you regularly use a vacuum cleaner to clean the dirt, you reduce the risk of your exposure to potential allergens carried by dust.

Bed with fabric headboard

Step 3: Use Detergent

After cleaning the dust, the step involves using detergent to remove stains on the fabric.

  1. Fill a bucket with lukewarm water and add a few scoops of fabric detergent to make a solution.
  2. Test if the solution causes color fading of your fabric by applying it on a small and not easily visible area of the headboard. 
  3. If it looks alright, apply the solution to stain marks that are present on the fabric. Use a rag or clean piece of cloth to do the same.
  4. Work gently on the stains, and the cloth you use must go well with the material of your fabric. Preferably use natural fibers for cleaning.
  5. After soaking the fabric completely in the solution, rub the stained areas smoothly till the stain marks disappear entirely.

Step 4: Use Upholstery Spot Cleaner

Even after rigorous cleaning with the detergent solution, it may happen that the stain marks do not disappear completely. In this kind of situation, use an upholstery cleaner suitable for the fabric type.

  1. Spray the cleaner gently on the stained surface and let it sit for some time. 
  2. Then, use a piece of cloth to rub the spot cleaner uniformly over the entire surface.

It is not advisable to use these commercial spot cleaners with sensitive fabric like velvet or polyester. Use it only when necessary and in small amounts.

Step 5: Dry The Fabric

If your vacuum cleaner supports wet cleaning, use it to remove moisture from the fabric.

  • If you do not possess such an item, you have to make sure you dry it properly before you can begin using it. Not drying it correctly can cause it to stink.
  • Place the fabric under a fan so that the fast wind can dry it effectively.

It is advisable to dry the fabric under sunshine if possible as it can kill any potential bacterial growth on the surface of the fabric.

Bedroom with TV display

Step 6: Make The Fabric Smell Good

After you have completed cleaning the fabric, you can use some natural and homemade cleaners to make the fabric smell beautiful.

  1. Make a mixture containing baking soda, cornstarch, cornmeal, bay leaves, borax, and some cinnamon. 
  2. Grind them finely to ensure that they have a fine powdery texture.
  3. Put this powder in a clean piece of cloth, and with the piece of cloth, rub the powder on the fabric surface.
  4. Let the powder stay on the fabric for some time so that some of it is absorbed in the fabric.
  5. Use a vacuum cleaner to remove the excess powder articles and clean the fabric.

This process adds a nice smell to your fabric. Here’s a quick video guide to help you with the headboard cleaning process.  

Frequently Asked Questions

How Often Should A Fabric Headboard Be Cleaned?

You should ideally dust the headboard weekly and clean it thoroughly once a month. But, how frequently you want to clean your headboard depends on how much dirt it accumulates. It also depends on the weather, and on the amount of time you can invest.

Is It Expensive To Clean A Fabric Headboard? 

No, you can use household items to clean a fabric headboard. Barring from chemical stain removers, most things required to clean a headboard are items of daily use. Also, cleaning the fabric regularly ensures that it is in good condition and stays usable for a long time.

Hence the cost involved in cleaning it is a fair trade-off.


The fabric headboard used along with adds a significant visual effect to the bed. Therefore, it is essential to keep it clean, and doing it is very simple. If proper care is taken while cleaning the fabric, it will continue to make your bed look good for a long time.

How To Clean Jordan 11

Jordan 11 shoes placed on the ground

Cleaning snickers can be a tedious job, more when you’re dealing with the Jordan 11 shoes. That’s because it is composed of EVA foam, patent leather, and a premium mesh on the uppers. In this article, we’ll tell you how to clean Jordan 11 shoes the right way.

How To Clean Jordan 11 Shoes  

Removing scuff marks and cleaning patent leather are the two most challenging tasks when cleaning Jordan 11 shoes. You can maintain the leather flexibility by occasionally applying a thin layer of petroleum jelly or conditioner.

Jordan 11 shoes placed on the ground

Step 1: Perform A Basic Clean

  1. Before deep cleaning the shoe, you need to clean and remove free dirt particles from the shoe’s surface.
  2. Take the two Jordan 11 shoes and knock them together to remove any dirt particles that might be stuck in their sole. 
  3. With the help of a toothbrush, carefully remove all solid dirt particles attached to the shoe’s creases and corners.
  4. Using a paper towel or a soft piece of cloth to remove any debris or particles of dirt that are visible.
  5. Make sure you dust the shoes over a surface that can be cleaned easily like concrete, or preferably outdoors.
  6. Soak a sponge or a small piece of cloth in warm water and with it clean the sole of the shoe. This will help to get rid of all superficial stains. You can also use magic stain erasers.

This process can also be done using sneaker cleaning wipes that effectively remove stains from the shoe surfaces. Mild baby wipes can also do the trick for mild stains.

Step 2: Go For A Deep Clean

After the debris and loose dirt fragments are removed from the surface of your Jordan 11 shoes, your shoe is ready for a deep clean.

  1. In a container, pour some cold water and add a few drops of dish soap. This solution needs to be used for proper cleaning of the shoes.
  2. Dip the bristles of a shoe brush into this solution and use it to clean your Jordan 11 shoes. Scrub the surface properly with the brush.
  3. Repeat this process for some time, periodically dipping the brush into the soap solution to ensure effective cleaning.
  4. Use cold water to properly rinse off the soap water from the shoe surface after scrubbing it properly. Remember, warm water can damage the glue and fabric of the shoe.
  5. Squeeze the shoes, pat them on a dry surface and remove all excess water from the shoes. Use a paper towel to remove all the excess water.
  6. Now, it is time to dry the shoes thoroughly. Dry it in front of a table fan to ensure the process is fast. 
  7. It is advisable to dry the shoes under sunlight as it also helps prevent bacterial growth in the shoes and helps to deodorize them.
Clean Jordan 11 shoes

Step 3: Clean The Laces 

The laces also need to be cleaned properly to ensure that your Jordan 11 gets the appearance you want it to.

  1. You can clean the laces in a washing machine. Use cold water for the washing machine and operate it in a gentle mode.
  2. Use a mesh laundry bag to put the laces into the washing machine. This prevents the laces from getting entangled and hence getting damaged.
  3. You can use a pillowcase in the absence of a mesh laundry bag. Remember to shut it properly before placing it inside the washing machine.
  4. Take a small bowl filled with lukewarm water and a small amount of detergent into it. Stir it properly to create a solution of uniform density.
  5. Put the laces into the solution and stir for about ten to twenty seconds. After this, let it stand for about half an hour. This should remove all the dirt from the laces.
  6. Now, take out the laces and dry them properly. Squeeze it to remove the excess water and then dry it on a paper towel.

This process cleans your shoelaces. However, due to usage, the laces get worn out faster than the shoes. Therefore, it is recommended to buy new laces if your laces are over-damaged.

As we use shoes regularly, they need a proper cleaning and care routine to maintain their durability and appearance in the long term.

Step 4: Deodorize The Shoes

Even after cleaning your Jordan 11 shoes, it is wise to take some steps to remove any chances of odor coming from your shoes.

Closeup of Jordan 11 shoes
  1. Take some tea bags of your choice, about two to three, and place them inside both the shoes. Let them stay inside the bag for almost a day.
  2. The teabags can suck out any excess moisture from inside the shoe, which is the leading cause of the foul smell. A fresh-smelling tea bag makes the shoe smell fresh.
  3. Make a solution of water and vinegar, taking both in equal amounts, and spray it over the surface of the shoe. Also, spray the solution inside the shoe.
  4. Place the shoes in front of an electric fan to properly dry the shoe and move to the next step.
  5. Pour some amount of baking soda into a bag and tie the mouth of the bag tightly. Put it inside the shoe for a day to remove the odor.

Make sure not to add baking soda directly on the shoe surface to avoid potential damage. Here is a short video to help you clean a Jordan 11 shoe.

Frequently Asked Question

How Frequently Should A Jordan 11 Shoe Be Cleaned?

The cleaning routine for a Jordan 11 shoe depends on how often you use it, and also the extent of it. However, on average, you should regularly dust your shoe and clean it once every two months.

Is It Costly To Clean Jordan 11 Shoes?

The cost involved in cleaning Jordan 11 shoes is very minimal. The only thing you might need to buy is a sneaker cleaning swipe, which is optional. All other items required are things of daily use, and hence almost no cost is incurred for cleaning Jordan 11 shoes.


The Jordan 11 shoes help to protect your shoe when you go out wearing them. However, they also need to be maintained carefully so that they can last for a long time. Cleaning the shoe is simple, and if done methodically, it helps keep the shoe in the best possible shape.

How To Clean A RC Car

Man holding a dirty RC Car

RC cars are more than just toys now. With so many mechanical and electrical components embedded in them, they demand proper maintenance. However, people might find cleaning them a hassle. But, with the proper steps, cleaning a RC car is achievable.

How To Clean A RC Car

Knowing how to clean a RC car is important, as it affects their performance abilities. Therefore, follow these methods and steps: 

Person tinkering with an RC Car

Cleaning Method: Cleaning the RC Car with General/DIY Cleaner Solution

It is the most commonly preferred method. Moreover, it is easy, convenient and practical, when you carry it out properly. Here’s what you should do: 

Step 1: Remove the Batteries from the Car

  • Remove all the power sources and electrical components. 
  • However, use essential tools to remove the batteries. 

Step 2: Remove the Loose Dust or Debris from the Whole Car

Use compressed air and brush to remove dust, dirt, and loose debris from all over the RC car body, including the battery and wiring regions. Make sure you clean the chassis, motors, bearings, and heat sink. It is important before you can move onto the next step. 

Step 3: Remove Tires and do the Cleaning

  • Remove the tires carefully by unfastening the joints and screws. 
  • Use a low-pressure water hose for cleaning the tires.
  • Scrub them with an old toothbrush. 
  • Remove all the muddy debris and dirt from the tires.
  • Now, clean it with water. 
  • With tires removed, clean the visible steering and suspension area.

Remember to cover the breathing hole of all the tires. It is to prevent water from getting inside and causing damage. 


It is essential to clean the tires on priority because they keep the car stable. Weight imbalance in four wheels will result in causing vibrations to the car, and stability will deteriorate. Hence, it would help if you cleaned it properly.

Step 4: Spray DIY Cleaner to the RC Car & its Parts

Man holding a dirty RC Car
  • Prepare a DIY cleaner solution by mixing warm water and mild detergent.
  • As the parts are out, you can now spray the cleaner on the RC car unit. 
  • If your steering, suspension, tires, and other parts are waterproof, you can spray them as well.
  • Remove the caked mud or dirt from the car and its parts by using a toothbrush. 
  • Repeat the process unless the car and its parts are spotless. 

In case the RC car is not waterproof, then you might have to use a different cleaning agent and follow the below steps:

  • Use denatured alcohol for non-waterproof RC cars and parts.
  • I prefer alcohol wipes for removing dirt and debris from the chassis.
  • Use a toothbrush to apply denatured alcohol to the nook and corners of your RC car.

Step 5: Dry the RC Car

The final step is to dry the RC car under sunlight in a clean surface like your deck, for quite some time. The water should drip off and completely dry before you fit the parts. However, if you wish to get over this faster, blow low-pressure air to dry the water.

Along with that, you can also use a dry cloth to remove excessive moisture. 

Step 6: Check for the Rust and Spray Anti-Rust Solutions

If you have an old RC car, then you need to check on the possibility of rust on metal parts. Look closely, and if you find any, use chemical or anti-rust sprays on them. You need to mandatorily spray them on the metal caps and bearings once the cleaning is over. 

Man putting oil on an RC Car

Step 7: Lubricate the Moving Parts & Joints

  • Use WD 40 oil to Re-lubricate all the moving parts and joints.
  • Lubricate the drive train and suspension components.
  • After lubrication is over, reassemble the car. 

This video will give a clear understanding of cleaning a RC car.

Frequently Asked Questions (FAQs)

How Frequently Should I Clean My RC Car?

You should clean your RC car after every off-road spin. The dirt and debris will get into the gearbox of your car, and it might increase the possibility of rusting. So, depending upon where you take the RC car for a spin, you need to plan out your cleaning sessions.

Is the Cleanliness of the RC Car Responsible for its High-End Performance?

Yes, indeed. The tires, wheel bearings, and suspensions should be free from dust or debris to function smoothly. Frequent lubrication is essential for the smooth mechanical operations of the RC car. 

For more excellent tips about how to clean a RC car, read this post.


Stick to these steps, and you will provide your RC car the boost it needs. Furthermore, even if the RC car you use is an older variant, it will still perform superbly with timely and proper cleaning. So, what are you waiting for?

Start the cleaning process asap.

How To Clean Tennis Balls

Tennis balls spilling out of a canister

Although tennis balls can withstand some amount of scrubs and scuff, not maintaining it regularly could make them either too squishy or too hard. Moreover, dirty tennis balls need a slight extra force to bounce. In this article, we’ll talk about the different methods of how to clean a tennis ball. 

How To Clean A Tennis Ball 

The dirt and sand accumulated on tennis balls can be pretty abrasive and get them worn out quickly. A well-maintained tennis ball will have some amount of resistance in them.

Person holding a racket with tennis ball

Method 1: Hand Washing Method

Handwashing is probably the easiest method to clean a tennis ball. However, this process is manual and requires some effort. So, follow these steps to hand wash your tennis ball.

Step 1: Gather The Required Materials 

To wash your tennis ball manually, gather these required items: 

  • A medium-size bucket 
  • A pan of warm water 
  • Laundry Detergent 
  • A microfiber piece of cloth

Step 2: Prepare The Soap Solution

  1. After you have gathered the above-mentioned three items, prepare the soap solution. 
  2. Take a medium-size bucket and fill it with a pan of warm water. 
  3. Keep the water temperature between 101°F to 107°F to maintain an optimum temperature. 
  4. If the temperature exceeds 107°F, add normal water to bring the temperature within this range. 
  5. Now, put some amount of mild laundry detergent in the water solvent. The quantity of the added detergent should be similar to what you use for a shirt. 
  6. Now, agitate the solution in a circular motion to bring out the foam. Ensure that there is no undissolved detergent in the solution, as it might stick to the ball fabric. 

Step 3: Cleaning The Tennis Ball 

  1. Put the tennis ball in the soap solution and agitate the mixture once again. Keep spinning the ball inside the soap solution for at least five minutes. 
  2. After spinning for 5 minutes, leave the ball in the soap solution for about 1 to 2 hours. If your tennis ball accumulated extra dirt, extend the period to 3 hours. 
  3. Now, take the ball out of the soap solution and rinse it with clean water. You can also dip the ball in a bucket of clean water or wash it under the tap. 
  4. Leave the ball to dry for another hour in a dry place, like a clean zinc countertop. Now, rub your tennis ball with a microfiber cloth gently, so the fabric does not wear out. 
Washing machines

Method 2: Washing Machine Cleaning Method

If you want to speed up the tennis ball cleaning process, prefer using a washing machine. 

Step 1: Gather The Required Materials

Before you get started, get all the materials you need. 

  • A washing machine 
  • A mild detergent
  • A microfiber cloth 

Step 2: Prepare The Washing Machine 

  1. Prepare the washing machine by filling the tub with warm water. 
  2. Keep the optimal temperature the same as the above method. 
  3. Put around three teaspoonfuls of detergent in the machine’s tub and dip the tennis ball inside it. 
  4. Close the vent and keep the settings to the lowest spin cycle of the machine. 

Step 3: Cleaning The Tennis Ball

  1. Now, turn on the machine and leave it operating for 10 to 15 minutes. Here’s a video tutorial to help you clean a tennis ball in a washing machine.
  2. After spinning for 15 minutes, turn off the washing machine and take out the tennis ball. 
  3. Wash the tennis ball under a tap or dip it in clean water for 5 minutes. 
  4. Keep the ball wrapped in a microfiber cloth for 7 minutes, and then wipe it gently. 

Method 3: Cleaning Using Kleenball 

The equipment used in this cleaning method is Kleenball, invented in 1950. It looks like a tennis ball that can be dissected into two hemispheres. 

There are brushes fitted inside each hemisphere to clean the ball. The outer casing is fabricated from wood, and the brushes are of plastic. 

Please put your tennis ball inside the Kleenball and press it such that the two halves get completely closed. 

Now, rotate the two halves of the equipment in circular directions. Repeat rotating the halves in the opposite direction after a while. 

Continue this process until your tennis ball gets cleaned. 

Tennis balls spilling out of a canister

Additional Tips 

  • Use a hairdryer to drive the ball instead of keeping it wrapped in a microfiber cloth. Drying the ball with a hairdryer also prevents fuzz balls on the fabric.
  • Use a pet-friendly detergent to keep your pets safe from harmful allergies. At the same, such detergents work the same as the general ones. 
  • You can use a clean tissue or toilet paper to wrap the tennis ball. These papers are porous and absorb more water and microfiber. 
  • Use a hair conditioner along with the detergent to wash your tennis ball. Doing such keeps the fabric in good condition and free from fuzz balls. 
  • Bounce the tennis ball over a clean surface like your floor, to check the amount of moisture it holds. You can also evaluate the time left for the ball to dry completely.
  • When playing with a tennis ball, follow player tips and recommendations for safety.

Frequently Asked Questions

Can Water Damage My Tennis Ball? 

Yes, water can damage the fabric surface of your tennis ball. However, it is possible only when it is exposed to water for a more extended period.

The playability of the tennis ball degrades if it is dipped in water for more than 5 hours. 

Is A New Tennis Ball Better Than A Cleaned One? 

A new tennis ball may not be better than a cleaned one. In many instances, the playability of a cleaned tennis ball is similar to a new one. 

When it comes to fabric, a new tennis ball is always better than a cleaned one. 


A tennis ball can endure a lot of pressure, including pet bites and heavy thrashes. Also, a good quality tennis ball holds its playability for years. 

But, these facts should not be the reason why you don’t maintain the ball. A good sportsperson respects all pieces of sports equipment he/she owns. 

Therefore, you should maintain your tennis balls just like your rackets or the court. A dirty tennis ball may be harmful because it touches many surfaces. 

How To Clean A Bike Chain With Household Products

Bike chain

It can be super tedious to clean bike chains, and time-consuming too. But if you want your bike to run smoothly and last longer, there’s no other way but to clean the chains. While there are a few ways we can clean it, not all are effective and cheap.

In this article, let’s see how to clean a bike chain with household products.

How To Clean A Bike Chain With Household Products

The bike chain acts as a medium for delivering the power generated in the engine to the rear wheel. A dirty chain will have increased frictional losses and degrade the overall performance of the bike.

Closeup of a bike chain

Materials Required

  • A few bottles
  • A pair of gloves
  • An old t-shirt or a rug
  • Any oil that can be used as a lubricant, preferably chain lubricants
  • Kerosene or turpentine oil
  • Any metal cleaner
  • An apron

Protective Measures

  • The bike chain is mostly soiled with grease all the time. Make sure to put on a pair of gloves and an apron to prevent your hands and clothes from getting dirty.
  • Make sure you have all the necessary items available before you begin the cleaning process. 
  • Some of the items may not be suitable for children, so choose a place away from their reach, like a clean concrete.
  • While disengaging the chain, make sure you study it properly or click pictures to enable smooth reassembly.

Step 1: Disengage The Chain

Though disengaging the bike chain is not essential for cleaning it, doing so is highly recommended as it makes cleaning a lot simpler.

  1. The bike chain is held in its slot by a link. This link is held by a pin which you need to slide and expose the master link.
  2. Pull the chain free after feeding the chain through the drivetrain. 
  3. Keep a count of all the bolts and nuts that are removed while disengaging the chain.
  4. Do not lose or misplace them, as you will need them while reengaging the chain.

Step 2: Use Degreaser

The degreaser, as the name suggests, helps to remove the grease that accumulates on the chain.

In case it is not available, you can also use a detergent solution in warm water.

  1. Fill a bottle with the degreaser or detergent solution and soak the disengaged chain in it.
  2. Ensure the chain is completely immersed in the degreaser, and then close the bottle’s lid tightly so that it is as airtight as possible.
  3. Now, shake the bottle vigorously for a few minutes. This is essential for the degreaser to start acting on the grease on the chain.
  4. After this, let the bottle stand still so that it can further act on the dirt. The bottle should be left undisturbed for about twenty minutes to half an hour.
Man riding a bicycle

After taking the chain out of the bottle, you should repeat the entire process taking some fresh detergent solution this time if you still notice some grease covering.

Step 3: Removing The Grease

After the degreaser has acted on the grease for a considerable amount of time, you have to remove the grease, which may have loosened by now. 

  1. Spray some more degreasing liquid onto the bike chain. Again, let it stay on the chain for about five minutes.
  2. Soak an old t-shirt or a rug in some amount of kerosene or turpentine and begin to scrub the chain with it. This begins to remove grease from the chain.
  3. The scrubbing process with kerosene must be repeated multiple times, with periodical soaking in kerosene until the chain is thoroughly cleaned.
  4. When you are satisfied, wipe the kerosene with a clean piece of cloth and let the chain dry. Let it dry under sunlight, preferably.

Step 4: Re-Engage The Chain Into The Bike

Once the grease has been removed from the chain, you must put the chain back into the bike before proceeding further.

  1. Hold the bike steadily and adjust both ends such that the master link meets precisely at the midpoint of the bike. Now reattach the master link carefully.
  2. Slide the pin of the master link to its original position and complete the entire reconnection process.
  3. Ensure that the chain is tightly affixed to its slot. Feel it with your fingers, and if your fingers don’t warp, you are good to go.
  4. Different models of bikes may require some additional steps. Refer to any manual that comes with the bike to have a smooth re-engagement process.
  5. Refer to pictures of the bike chain you had clicked previously so that this process is smooth.

Step 5: Apply Lubricant

Bike chain

After cleaning the chain and attaching it to the slot, you should apply a sufficient amount of lubricant for smoothness and longer cleanliness.

  1. Apply a thin amount of lubricant on the chain after holding the bottle precisely above the middle pin of the chain. Pour the lubricant gently.
  2. Pour a few drops of lubricants and rotate the chain. Repeat this process a few times. This puts the chain in a clean and working condition. 
  3. Depending on the age of your chain and the kind of terrain you ride on, you have to choose the amount of lubricant needed.

This completes the cleaning process of your bike chain. Carefully put away the items used for cleaning the chain.

Here is a video guide for using baking soda and dishwashing liquid instead of degreasers.

Frequently Asked Questions

How To Clean A Bike Chain Without Removing It?

Cleaning the bike chain without removing it is not recommended as it does not clean the chain thoroughly. However, it is suited for short-term cleaning. Soak a piece of cloth in soap water and use it to clean the chain by rubbing it on it. This removes some amount of grease from the chain.

Can Homemade Degreasers Be Used For Cleaning?

Homemade degreasers are as effective as the commercially available ones. It is more economical and enables you to change its composition according to your need and hence make it more productive.


The chain of a bike is its more important part which enables it to function smoothly. Therefore, it needs to be cleaned periodically so that the bike runs flawlessly. Cleaning it is simple, and doing it properly keeps your bike in good condition.

How to Get Motivated to Clean When Overwhelmed by A Mess

Two persons cleaning together a messy room

Whether you live alone or with your family, your house tends to become messy most of the time. Especially when there are little kids at home, the mess tends to accelerate under your roof.

This guide will help you learn how to get motivated to clean when overwhelmed by a mess.

How to Get Motivated to Clean When Overwhelmed by a Mess

Go through the following guide to get motivated to clean and declutter.

#1 Find Your Reason

Having reasons for cleaning your home is important. For example, if you’re tired of searching for a dress in your wardrobe, you will be compelled to declutter the mess.

If you have kids at home, it gives you all the reason you need to clean the floor with a disinfectant. It’s your responsibility to maintain a hygienic environment for kids. This may also apply having pets, such as cats, in your home.

A person wearing protective equipment while spraying a disinfectant

Having a clean bathroom and kitchen is an important step towards hygiene. It is a big reason to start cleaning.

All the above examples imply that you get motivated to clean your house only when it is personal to you. Unless and until you feel the need to clean, you will never be convinced about the endeavor. 

#2 Prepare a To-Do List

When you prepare a to-do list, it becomes easier for you to manage the tasks. Keep this list of priority-based tasks always at hand.

Lining up troublesome and challenging tasks in the beginning can exhaust your energy and motivation. It’s better if you pick less challenging tasks first.

For example, you can clean the dining table and shelves first because such tasks will instantly make your place look better and consume less time.

The tasks that are completed quickly will give you inner satisfaction and boost your motivation. When you’re mentally prepared, decluttering your house won’t seem like a problem.

#3 Don’t Get Distracted

Distraction is the biggest enemy of your concentrated effort. Once you get side-tracked, it would be challenging to gather the same amount of motivation.

This also means that you should focus on a single task first. If you leave any task unfinished, you won’t feel like completing it again.

Let’s say you are arranging your clothes in your wardrobe, and you find some unwashed clothes. Instead of keeping them aside, you go to wash them up first. This distraction can pile up a lot of unfinished tasks in the end.

Stick to your first task and then move towards the next. To save yourself from getting distracted, you can note down the task in your to-do list depending on its priority.

#4 Set a Timeline

You probably know how setting your goals can help you achieve better results. When you are about to complete your first task, set the goals for the next task on your priority list.

When you set up a timeline and complete your tasks in an orderly manner, you will be able to clean up your house. Completing the first task will motivate you to start the second one soon.

If your whole house is in a lot of mess, you can set daily goals. You cannot expect yourself to complete all the tasks in a single day. This could also help you manage your time, especially when you are busy.

Set daily goals based on urgency. For example, washing dishes and mopping the floor are essential tasks. Washing clothes and deep cleaning of the house can take a back seat.

#5 Listen to Music and Ask for Help

When you enjoy something, you tend to complete that task sooner.

When cleaning alone, you can put your headphones on or play songs on your speaker. Listening to energetic music while cleaning the house might keep you active for a longer period.

Ask other members of your family to lend a hand. You alone don’t have to go through all the trouble. Obtaining a helping hand in decluttering will reduce your workload and add a little fun to the cleaning process.

If you have teenagers in the house, you can ask them to help you out in tasks like arranging cushions, cleaning tabletops, etc. More the hands, the better it is.

Two persons cleaning together a messy room

#6 Play the Arrangement Game

Before beginning the cleaning process, it is suggested that you clear up the overall mess in a room. For example, toys all over the floor or messy body pillows on the bed, used dishes all over the house, messed-up makeup is to be kept in their place immediately.

To start with, keep all the junk away before you get on to the cleaning part. Put all the broken toys of your kids in a basket and put them away.

Clear up everything that’s scattered on surfaces and slabs in your house. This will be the first step of your deep cleaning process and make it easier for you to complete.

Ensuring nothing is scattered across any room in the house is critical to the process of cleaning. Once you’re done with a room, only then move towards the next room.

#7 Set a Routine

It’s important to develop a clutter-free routine if you’re living by yourself. There are a few clutter-free hacks that might help anyone in the cleaning process.

Maintaining a basket organization system at home helps in maintaining a clutter-free routine. Keep all the kitchen stuff, toiletries, toys, etc., in proper baskets or boxes so that they don’t go missing when you need them.

When you keep everything in its place after using it, the practice keeps your house neat and tidy. Then it won’t take you days to do the deep cleaning.

Clean your house daily; arrange all the stuff, clean all the tabletops, shelves, etc. You can take up the bigger cleaning jobs over the weekend like arranging your cupboard, deep cleaning of the house, etc.

#8 Make Rest Your Reward

Getting rest is extremely important in between intervals. A human body cannot keep working constantly. Hence, taking a rest for some time is essential.

For example, once you’re done cleaning the lobby or a single room, you should take a break for at least 10-15 minutes. This interval is meant for you to relax. You might even want to get a cup of coffee during that time, so you don’t become lazy.

When one of the major tasks on your list is accomplished, you can take a generous break of 40 minutes. Give some time for your body to relax so you can start working back with doubled energy.

The most important thing to understand here is that you have to be patient when cleaning your house. It cannot happen overnight when it’s so messy, it might take a couple of days, and that’s all right.

Frequently Asked Questions

How Can I Reduce the Mess in My House?

If you have an organized system in your house, like kitchen stuff organized in boxes, you won’t see the mess all over your house. When you have a healthy cleaning routine, you won’t become messy at all.

Two persons organizing things with boxes and wrap

What Is the Quickest Way to Clean a Messy House?

A big mess isn’t easy to clean. However, keeping used dishes in the sink, picking up laundry in a basket, and picking up all the scattered toys can accelerate the cleaning process.


Cleaning a big mess requires a great amount of motivation. Using some of these tips will help you stay on track and keep your home clutter-free and welcoming.

How to Clean Steel Pennies

Close up shot of steel pennies

Collecting pennies is one of the most popular hobbies of all time. Though collecting coins is fun, keeping them clean is also necessary. From a variety of cleaning methods, you should use a chemical-free method to clean your steel pennies.

How to Clean Steel Pennies

Pennies are usually made of copper. Being a highly reactive material, copper gets discolored quickly. Here’s a breakdown of six methods to clean pennies:

Method #1: Cleaning With Soap and Water

If you have a hobby of collecting steel pennies, you must clean them to maintain their color and glaze. Make sure that you have all the materials required to clean.

Materials Needed

  • Warm water
  • Dishwashing liquid
  • An old or a used toothbrush
  • A clean cloth
Steel pennies vertically stacked on paper money

Cleaning Process

When the coins get piled up with soil, deep cleaning of the coins is essential. Before making it brighter and shinier, cleaning off the dirt should be a priority. Cleaning steel pennies is similar to washing the dirt off the dishes.

When you have the required materials ready, mix some dishwashing liquid in water. As a result, a soapy solution will be formed. Dip the toothbrush into the solution until it is fully soaked.

Next, hold the penny in one hand and start scrubbing the dust off the penny using the toothbrush. Clean gently, and make sure that you scrub off all the dirt from the penny. Repeat the same process for all the pennies.

When you’re done scrubbing all your pennies with the toothbrush, you have to rinse them. Remember that you must rinse these pennies in warm water. At last, dry them with a soft clean cloth/towel.

Method #2: Cleaning With Lemon Juice/Vinegar and Salt

This is one of the most effective ways to clean the steel pennies. Before moving on to the process, gather the materials required.

Materials Needed

  • A quarter cup of lemon juice or white vinegar
  • A teaspoon of salt
  • Glass or a cup
  • A spoon
  • Filtered water
  • A soft clean cloth/towel

Cleaning Process

Using this trick will brighten up your pennies. Take a cup/glass and fill it quarter way up with lemon juice or white vinegar. After adding a teaspoon of salt into the cup, stir it till it dissolves completely.

Dip some of the pennies into the cup. Make sure that you do not stack the pennies on top of each other.

Wait for about 5-6 minutes, and then check whether your pennies are bright enough. If they’re not bright enough, put them back inside the cup for another 5 minutes.

On average, it takes at least 15 minutes for the pennies to brighten. When you achieve the desired color, rinse the pennies under warm water. After rinsing them nicely, dry them with a soft cloth.

This method is used to restore the original brighter color of the pennies. To obtain a polished surface, you can use a polishing cloth on your pennies after cleaning them.

Method #3: Cleaning With a Pencil Eraser

If you want a less messy cleaning solution, this one is the most feasible. Just gather all the materials.

Materials Needed

  • A few pencils with soft erasers. You can also choose to purchase a soft eraser.
  • A clean cloth or a paper

Cleaning Process

Spread your clean cloth or paper on the table or the floor. Keep a single penny on the cloth to be cleaned. Lay it flat on the cloth/paper.

With one hand, hold that penny stable on the cloth. Grab the pencil eraser and start rubbing the penny to clean the dirt off it.

Once in a while, move the eraser in a circular motion to get better results. When one side of the coin is clean enough, flip it to clean the other side as well.

Repeat the same process for the rest of the pennies. Keep rubbing the eraser until it gets rid of the accumulated dirt. This process shouldn’t be adopted when you have a large number of pennies to clean.

Method #4: Cleaning With Tomato Ketchup

Almost similar to cleaning with an eraser, this process adds a little more fun to the cleaning. Let’s see what all you need to clean your pennies with tomato ketchup.

Close up shot of steel pennies

Materials Needed

  • A cup filled quarter-way with tomato ketchup
  • A small container to perform the cleaning process in
  • An old toothbrush
  • A soft clean cloth to dry

Cleaning Process

This method uses ketchup to remove the oxidation. Begin by adding a quarter cup of tomato ketchup into the small container. The next step uses the toothbrush.

Take the toothbrush and dip (only the brush part) into the ketchup. Now, either keep the penny in your palm or keep it on a flat surface such as the floor. Once the penny is laid in a stable position, it is ready to be cleaned.

Take the ketchup-dipped toothbrush and scrub it over the coin in a circular motion. The circular motion will bring an all-new shine to your penny, brighten it from dull color to its original shine.

Repeat the same process for all the dirt-laden pennies. Next, wash and rinse all the pennies properly under warm water. At last, dry all the pennies using a dry cloth/towel.

Method #5: Cleaning With Baking Soda or Bon Ami Cleanser

This is another very effective method to bring back the shine of your pennies. Have a look at the requirement to conduct this procedure.

Materials Needed

  • Two tablespoons of baking powder or Bon Ami cleanser
  • Small container
  • Water
  • Soft cloth/towel to dry

Cleaning Process

This procedure requires either the Bon Ami cleanser or baking soda, whichever is easily available.

Add two tablespoons of baking powder or cleanser into the container. This step is to be performed carefully as the water should be added in the right amount to make the solution paste-like.

When you successfully make the paste-like solution, apply the solution on both sides of the penny. Use your forefinger and thumb to clean the penny in a circular motion. Repeat this process with the rest of the pennies.

Using the solution, clean them properly. Next, wash and rinse the pennies under warm water.

Lastly, dry the pennies using a soft dry towel. This is the most efficient method used by most penny collectors to make their pennies shine.

Method #6: Cleaning With Goo Gone

Cleaning with an adhesive remover gives a brighter shine to your collection of steel pennies. Collect all the below-mentioned materials first.

Materials Needed

  • A bottle of Goo Gone adhesive remover, 8 Oz
  • A small container
  • Paper towels
  • A clean, dry cloth

Cleaning Process

Goo Gone is recommended when your coins have accumulated adhesive or glue. This adhesive remover restores the shine of your steel pennies.

Pour some quantity of Goo Gone into a small container. Lay the coin on a flat surface or hold it in your palm. Next, dip a one-fourth part of the paper towel inside the liquid.

Gently rub the Goo Gone dipped towel on both surfaces of the coin. If rubbing the coin doesn’t get rid of the glue, let it soak in the adhesive remover for some time. After taking the coin out of the liquid, rub both surfaces again.

Repeat this process for all of the pennies. Next, wash them nicely with soap and water.

At last, dry them with a soft clean cloth. If Goo Gone does not restore your penny’s shine, go for the soap and water method.

Stacked steel pennies on display with white background

Frequently Asked Questions

Why Should I Clean My Coins?

If you’re a coin collector, you know that they get corroded over time. Pennies have a certain sentimental value; hence, you should keep them clean and adhesive-free. When something is valuable to you, keeping them clean becomes your priority.

How to Get Rid Of Rust on Steel Pennies?

The best way to remove the rust from your pennies is to use white vinegar or lemon juice.

Add two tablespoons of vinegar or lemon juice and a teaspoon of salt. Mix well with water. Then soak the pennies into the liquid for some time.

This will get the rust off your steel pennies.


Collecting steel pennies is a very interesting hobby. When you’re fully invested in a hobby, you ought to perform it well. Hence, if you’re collecting coins, cleaning them from time to time is also very important.

Cleaning pennies isn’t really that challenging compared to stainless steels or nickel silvers. Now that you’ve learned six ways of cleaning your pennies, which doesn’t include the use of hydrogen peroxide, you shouldn’t have a problem getting them looking like new.

How to Clean a Sink Overflow

A close up shot of a bathroom sink with running water and sink overflow hole

A good start makes a good day. But what if you enter your washroom and a bad odor stops your day before it even begins? But don’t you worry, here is a multiple-method guide that will teach you how to clean sink overflow.

As a background, this smell could be coming from your sink that hasn’t been cleaned for long. The overflow hole might have got clogged and is not functioning anymore. Carry on!

How to Clean Sink Overflow

It’s a lot easier to pull off than you’d think:

Method #1: Use Hot Water

With frequent use and less maintenance, your household sink can impart a foul smell. This happens because of bacteria that have settled in the drain. Also, these unwanted organisms can clog the path of water and leave the sink overflowing.

A very simple way to unclog the sink and remove the stinking smell is to pour a kettle full of boiling water into the sink.

A bathroom sink with a sink overflow

By pouring boiling water into the overflow hole, the stagnant water in the drain would flush out. Moreover, molds and bacteria won’t be able to sustain such high temperatures. Thus, there won’t be any foul smell coming from the sink. 

You can pour more hot water into the sink if the sink struggles to unclog the first time around.


Don’t pour the boiling water directly into the overflow hole. Use a silicone funnel that can withstand the high temperature of the water.

Also, be cautious while handling the boiling water as it can burn your hands. Avoid pouring water without the funnel, as it will lead to a crack in the sink.

Method #2: Use a Rubber Plunger

Using a rubber plunger is one of the most common methods to unclog sink overflow. The plunger helps in unclogging the drains or overflow holes by creating suction across the rim. If you are all set to clean your kitchen or any other sink overflow, do the following:

  • Fill the overflow hole halfway with hot water.
  • Use a flat bottom plunger instead of a regular plunger to create suction.
  • Stick the plunger across the rim of the overflow hole with force.
  • Create suction by moving the handle of the plunger back and forth.
  • Repeat the process for 5-10 minutes.
  • Remove the plunger and drain down the water from the overflow hole to check if this method worked or not.

Method #3: Use a Sink Overflow Cleaning Brush

Today the market is flooded with various supplements that have made household chores easier. Getting your hands on one of the many overflow cleaning brushes can help you deal with an overflowing sink quickly.

These come with lots of spiral bristles for unclogging the overflow drainpipe. The bristles on the flexible brush help you reach difficult corners of the overflowing sink.

All you need to do is to put this cleaning brush in the overflow hole and slide it back and forth.

After unclogging the overflow hole, run hot water through the sink overflow. Use a silicone mold to pour hot water that will help to flush out the dirt into the drain. Repeat this step at least twice for best results.

Method #4: Use Vinegar With Baking Soda

Even if you use some of the unclogging methods above, the smell may not go away completely. This foul smell might be coming from a dry P-trap or stagnant water that hasn’t been replaced properly. It is also possible that the sink wasn’t cleaned properly.

In such cases, just using hot water may not be enough. But you can use ½ cup of baking soda and ½ cup of vinegar from your drawers. 

Use a snake tool to unclog the sink, then add ½ cup of baking soda and vinegar using a funnel or silicone mold and let the solution sit for 15-20 minutes.

Flush the solution with hot or boiling water. Beware while draining boiling water through your porcelain sink as it may fall apart.

Therefore, rather than pouring all of the water at once, pour it in parts.  If the smell persists, repeat the process another time.

A bathroom sink with running water and a sink overflow

Method #5: Use a Bio-Enzyme Cleaner

Bio-enzymes are natural cleaners that are used for multiple purposes. They are easy on your pocket and don’t negatively impact the environment. They unclog the overflow and kill the bacteria that live in the moist lining of the pipe.

Bio-enzyme cleaners are available in both liquid and powdered forms. To clean your sink overflow hole, grab 50ml of powdered bio-enzyme cleaner and mix it in 100ml of lukewarm or hot water.

You can also use the liquid bio-enzyme cleaner, mix 50 ml of the solution in 100ml of hot-lukewarm water and let the solution sit for 30- 60 minutes.

Pour this solution into the overflow hole and let it sit overnight. Rinse off the solution the following day with hot boiling water.

Method #6: Use Drain Cleaner

Like the bio-enzyme cleaner, a drain cleaning solution can also get the same results. But unlike Bio-enzyme cleaners, drain cleaners are not eco-friendly and have a strong chemical smell.

Mix a 50g sachet of drain cleaner in a mug full of tap water and flush the overflow hole with the solution. Repeat this process twice for better results. 

Finally, run hot boiling water down the line to remove the settled debris across the pipeline of the overflow hole.

Tip: Since the smell of the drain cleaner is quite strong, it is advised to use a drain cleaner that has added floral or fruity fragrance for better odor.

Method #7: Call a Plumber

If the problem continues to exist, it could be due to some other issues in the pipeline that cannot be fixed manually. The drain mechanism is quite complex, that’s why one should consult a professional for this.

It is possible that your overflow hole is clean and there is no stagnant water in the drain, but still, the smell persists from the sink. It could be possible because of the following reasons:

  • Sometimes small pests get stuck in the drain pipeline; due to lack of movement, they succumb and impart an unpleasant smell across the pipeline.
  • It is also possible that the sewer connection is leaking and causing a foul smell.

Hence, try contacting a professional or a plumber who can help with your drainage problem.

Frequently Asked Questions

How does sink overflow work?

A sink overflow is a hole on the inner walls of the sink that runs down the drain. The channel that connects the drain to the overflow hole is hidden and is inside the basin. When the sink is about to overflow with water, the hole drains an enormous amount of water down the line and keeps everything in a good state.

Why is there no overflow hole in the kitchen sink?

Kitchen sinks are usually large. Also, their design is quite different from the bathroom sink, which allows them to drain water without overflowing.

A close up shot of a bathroom sink with running water and sink overflow hole


The hole in your bathroom or another sink under the faucet is a ‘sink overflow hole.’ The main purpose of having this hole is to prevent the sink from flooding. Thus, when water fills up to the top, this hole prevents it from spilling.

As time passes, these helping holes can get clogged because of penetrating microorganisms in the drain. These organisms breed in a moist condition.

Thus, the overflow hole is a perfect place for them to breed. Apart from molds, another kind of grime or debris can also clog the hole. While not all bathroom sinks have an overflow hole, it is a good to have for your acrylic sinks or fiberglass sinks.

By following this multiple method guide, you can take care of the sink on your own without going to a professional all the time. Also, you can prevent the hole from clogging completely after going over this study.