How To Clean A Coleman Roadtrip Grill

A backyard or roadtrip grill has its own charm because of its handy and portable nature. It is what you need to make excellent barbeque plans work out. Coleman is one of the best brands to buy road trip grills from. It is because of their affordability, ease, and quality.  

However, it is still prone to accumulate bacteria, grease, and other cooking debris with use over time. This, in turn, deteriorates the efficiency of the grill. Therefore, it is important to seek routine cleaning to increase the longevity of the Coleman Roadtrip Grill. 

How To Clean A Coleman Roadtrip Grill

Coleman company recommends cleaning the grills after every use. The more you delay, the greasier the grill will be to clean. In addition, dried-up grease textures, flare-ups, mold growth, and other debris will stick hard to the grill base, making it difficult to remove them. 

Therefore, learning how to clean the Coleman Roadtrip grill is not only important for hygienic purposes but also proper maintenance as well. This guide will be your go-to cleaning manual.

Method 1: Clean Before Grilling With Mild Soap & Water

You don’t use your grill regularly. Instead, you might be using your Coleman Roadtrip grill primarily for outdoor fun activities, camping, road trips, and tailgating. So, dust accumulation is possible while it remains in the storage for so long. Therefore, you cannot use the grill right after it is out of storage.

Thus, you need to clean different parts of the grill by following the below steps before you re-use it for grilling purposes.

Step 1: Arrange The Necessary Supplies

  1. Venturi brush
  2. Grill brush
  3. A spatula
  4. A plastic scraper
  5. Cooking Oil
  6. Vegetable Oil
  7. Clean cloth
  8. Mild soap
  9. Water

Step 2: Clean The Grill Housing

  1. Take off all the removable parts from the grill. (Cooking grates, warming racks, drip trays, and burners)
  2. Now, there is easy access to reach the grill housing.
  3. Use a plastic scraper to clean out the food debris or residue stuck around grill housing.
  4. Now, prepare the solution of water & mild soap to clean the insides.
  5. Use a brush to apply the solution only after solid residues are eradicated from the surface.
  6. Rinse the grill housing with plain water to wash the soap solution remnants.
  7. Use a clean and dry cloth to wipe the grill housing.
  8. Finally, use another clean cloth and submerge it in cooking oil.
  9. Now, use it to wipe the grill housing to restore the shine.

Step 3: Clean The Grill Burners

  1. Use a grill brush to clean the burner surface.
  2. Apply some force to remove the stubborn residues or debris from the surface.
  3. Clean the burner ports using a paper clip.
  4. Now, use a venturi brush to clean the interior surface of the burner.
  5. Use a cotton swab for cleaning the debris from the valve gas jets.
  6. After cleaning the burner, place it back to its position over the grill properly.

Step 4: Clean The Cooking Grates

  1. Use a grill brush yet again for removing debris and residues off the grates.
  2. Washing the grates becomes easy when solid residues are removed.
  3. Prepare a solution of soap & water.
  4. Apply it onto the cooking grates using a cloth or a toothbrush.
  5. Scrub with a little pressure over the stubborn stains or debris accumulations.
  6. Rinse the grates with clean water to wash off the soap solution.
  7. Now, use a clean cloth to dry the grates before you can re-use them.
  8. Now, wipe the cooking grates with a cloth submerged in vegetable oil.
  9. Thoroughly wipe all over the grates to maintain the luster.
  10. Now, heat the grates for around 20 minutes with a temperature of 275 to 300 degrees Fahrenheit.(Use grill or oven for the purpose)

Step 5: Clean The Exterior Of Coleman Roadtrip Grill

  1. Use the soap & water solution for wiping off the exterior.
  2. Use a clean cloth dipped in the cleaning solution for the purpose.

Warning!

Do not prefer to use any chlorine or detergent solution for cleaning. Moreover, avoid using any of the abrasive solutions as well. It will damage the exterior.

Method 2: Clean After Grilling With Dish Soap

It is good to clean the Coleman Roadtrip grill before use to ensure that the grilling efficiency is restored. However, it is also advisable to clean it after use before storing it back on its shelf. Leaving the grill untidy after use is one of the main reasons you have to put in a lot of effort to clean it before re-using it every time.

Therefore, it is important not to repeat these mistakes, which might hamper your health and damage the grill. Instead, follow these below steps to know the right approach to cleaning the grill after use.

Step 1: Arrange The Things You Need

  1. A scraper
  2. A grill brush
  3. Get a clean cloth
  4. Dish soap would do the work.

Step 2: Start With Cleaning The Cooking Grates

While cleaning the grill after use, you should start with cleaning the grates first.

  1. Wait for the grates to cool down to a warm temperature.
  2. Now, use a grill brush to scrape out all the food residues freshly stuck over the grates.
  3. Use a specific scraper to rip off any of the burnt foods stuck over the grates.
  4. Prepare dish soap and water solution for washing them.
  5. Use a clean cloth to apply this solution over the grates.
  6. Once over, rinse them with clean water to remove dish soap remnants.
  7. Use a clean and old towel to dry the grates.

Step 3: Proceed To Clean The Grill Housing

  1. After grates, housing should be the next area that you must clean.
  2. Use the scraper to remove any of the visible food residue or debris off the grill housing.
  3. Prepare a mixture of dish soap and water to clean the interior of the grill housing.
  4. Rinse it and dry it to ensure that no water sits on the housing for a long time.

Step 4: Clean The Burners

  1. After every grilling session, the burner takes up a lot of mess.
  2. You will need paper towels to wipe off the burner.
  3. As the burner is still warm, the food residues will easily come off.
  4. If you are cleaning it late and the food residues are somehow stuck over the burner, use a grill brush to remove them.

Step 5: Look Out For The Drip Tray

  1. The drip tray catches extra grease as it is beneath the burners.
  2. Prepare a mixture of mild soap & water.
  3. Use a cloth dipped in the solution to wipe the greasy oil texture off the drip tray.
  4. Clean it thoroughly, and then rinse it with clean water to remove the solution remnants.
  5. Ensure that your drip tray is completely dry before you can go ahead and insert it.

Tip!

Seek removal of the propane tank to take off the drip tray for proper cleaning. Remove the propane tank right at the beginning of this cleaning method.

Step 6: Clean The Exterior Of The Grill

You can use just a wet cloth with mild soap solution to clean the exterior surface. However, as mentioned above, prefer not to use any abrasive chemicals or cleaning agents over the exterior surface to avoid any damage. Furthermore, as major cleaning is required for the interior region, you will not need much time and effort to clean the exterior.

Get a better & brief idea of these steps represented in this video. Check it out, and you will be more proficient in learning how to clean your grills.

Frequently Asked Questions

Can I Use A Pressure Washer For Cleaning My Coleman Roadtrip Grill?

Using a pressure washer is one of the right approaches for cleaning a Coleman Roadtrip grill. However, it is expensive and not readily available at your home. Therefore, this guide has only the DIY methods to help a huge amount of people do self-cleaning of their grills.

But, if you own a pressure washer, and want to do a thorough cleaning of your grill, then check out the process in this link.

What Will Happen If I Ignore Cleaning My Coleman Roadtrip Grill?

If you don’t prefer cleaning it right after use, the food residues might permanently stick to the grill’s surface. Eventually, this will deteriorate the grill, and you might experience a funky taste in your food.

Conclusion

As everyone says, apart from eating good food, even maintaining the cooking appliances is essential for ensuring good health. Hence, the concluding fact is that a roadtrip grill needs proper maintenance, right after or before use. It is not just for maintaining the life of the product, but it also raises self-health concerns.

Therefore, make sure that you learn the process and implement it on a routine basis.

How To Clean Snorkel Gear

Complete snorkel gear laid out in the beach rocks

Snorkeling is the practice or activity that allows you to go underwater and explore the beauty of the sea. Scuba divers, who dive into the deep water bodies, prefer using ideal snorkel gear for the purpose. A snorkeling gear consists of 3 major components: a snorkel mask, a breathing tube, and snorkeling fins.

The components’ names describe their functionalities and are the most crucial essentials for professionals or rookies to go snorkeling. Now, let’s check out the cleaning methods of snorkel gear.

How To Clean Snorkel Gear

The use of Snorkeling gear might seem very simple, but the cleaning process is complex and important. You cannot ignore the cleaning aspects, as it will deteriorate the efficiency or functionality of the gear, which in turn will trouble the diver underwater. Therefore, it is essential for you to learn how to clean snorkel gear to ensure that you do not invite adverse health effects. 

Person snorkeling under water

In addition to that, unclean snorkel gear will also ruin your underwater experience. So, follow this guide to learn the cleaning approach for snorkel gear.

Method 1: Cleaning The Snorkel Mask With Toothpaste

While you pick a snorkel mask, the crucial advice is to opt for glass masks for diving. The plastic ones are cheaper and easily available as well. But they are more prone to scratches that will compromise the visibility in the long run. Not just that, but even the small scratches will result in damaging the snorkel mask permanently. 

You must seek cleaning of the snorkel mask before and after the snorkeling activity. It is to ensure its longevity and durability. Also, while undergoing the manufacturing process, the glass snorkel masks are given a shiny silicone coat. It is to bring an appealing and bright look to the glasses.

But this coating is somehow responsible for fogging your view when you are under the water. The view will turn out to be hazy, and your experience will become unpleasant. 

Therefore, you need to seek cleaning of the glass snorkel mask with the use of toothpaste. Steps To carry Out This Method.

  1. Take a little toothpaste on your finger. I prefer to use normal toothpaste and avoid using gel-based ones. 
  2. Rinse off the paste from the glass surface by putting the mask under running water. A little pressure is enough to wash the paste from the entire surface of the mask, including the corners. 
  3. Now, you need to dry out the mask with the use of a soft towel. 
  4. Get an anti-fog solution from the online or offline stores that sell snorkeling gear components. Apply this solution over the mask to make it ready for use underwater. 

Remember that this process is important for you to carry out whenever you go snorkeling. If you intend to know more about defogging of the snorkel mask, then you can check out this article for the same

You can consider replacing the toothpaste with its alternatives, like dish-washing detergent & water/bleach or shampoo & water. Rest all the steps will be the same for cleaning off the snorkel mask. Also, after you finish your snorkeling activity, you need to clean the mask again. Rinse the mask under clean and normal running water to wash out all debris.

This is a complete video on how you can clean your snorkel mask. So, take some time out and watch this video demonstration for a better understanding of the same.

Complete snorkel gear laid out in the beach rocks

Method 2: Cleaning Snorkel Mouthpiece With Dishwashing Detergent

The snorkel mouthpiece is also an important part of the complete mask gear. It is the breathing tube that is mandatory for you to clean over time. The steps that you should follow to clean the breathing tube or snorkel mouthpiece are:

  1. You will need a large bucket or utensil for cleaning the breathing tube. 
  2. Now, fill the bucket or utensil with a mixture solution of dish detergent and water. 
  3. Dip the breathing tube in that solution, and let it settle down for around 5 minutes. 
  4. Now, take out the breathing tube and rinse it in clean water properly to remove the detergent solution remnants. 

The mouthpiece and the breathing tube are part of a snorkel mask that can be cleaned with any less-alkaline soap solution. Once you are done cleaning, you need to use a sponge or soft towel to wipe the mask. You must clean your breathing tube and mouthpiece after every snorkeling activity. 

Method 3: Cleaning The Snorkel Fins With Soap

Snorkel Fins are yet another crucial gear among all the others. Snorkel gear gives you momentum while you are underwater. To know more about the purpose of snorkel fins, you can go through this article!

But, along with understanding the importance of snorkel fin, it is also critical for you to prioritize its cleaning. The steps for carrying out the cleaning method for snorkel fins include:

  1. You will need a large bucket or utensil for cleaning these fins. 
  2. Fill the utensil with a less-alkaline soap solution. 
  3. Wipe all the dirt and sand off the fins by using your hands. Dust them off with any soft duster, but do not prefer to use a brush or scrubbing tool, as it might damage the fins. Minor scratches can result in damaging the fins in no time. 
  4. Let the fins settle in the soap solution for some time.
  5. Now, take them out and rinse them off under clean running water. Clean all the edges to remove the solution remnants. 
  6. Use a dry sponge or soft towel for drying the fins, and store them until the next snorkeling activity. 

Method 4: Cleaning Mold From The Snorkel Gear

Mold is yet another big problem for the snorkel gear components. In fact, mold affects their efficiency and longevity. The fungal growth or mold growth over the snorkel fins, tube or mask, will adversely affect your underwater experience and hamper your health.

Therefore, it is essential for individuals to treat the snorkel gear and keep it free from mold and fungal growth. 

One of the best cleaning techniques to eradicate mold and fungus from the snorkeling gear components is bleaching. Here are the uniform steps that you can follow for any of the snorkeling components:

Diving fins and mouth piece
  1. Put the fins, breathing tube, or mask (whichever is affected by mold) into the bucket.
  2. The bucket should have a bleaching solution. (Equal amount of bleach & water)
  3. Let the gear settle down for around 5 minutes within that solution. 
  4. The utensil should be large enough to cover the complete gear component. Not even a small part should be left unclean, as it might affect the apparatus and diver’s health. 
  5. You need to rub the moldy area gently with the use of fingers to clean it thoroughly. Keep in mind to cut your fingernails before this process, as you might scratch or damage the components.
  6. Take out the snorkel gear components, and rinse them off in running tap water. Rinse all the corners and nooks to wash away the bleaching components. 
  7. Use a soft towel or a dry sponge to dry the snorkel gear properly before you can store it! 

Frequently Asked Question 

What Should I Consider While Buying Snorkel Gear?

Snorkel gear will help you with all the water activities. Snorkeling is itself an underwater activity that demands the use of masks, tubes, and fins on priority. But, you need to choose the right quality products to ensure their longevity.

Also, you will need to consider the time of the year when you decide to go snorkeling because in winter months or at low-temperature conditions, you will need wet suits along with other gears. To know more about what you should consider while buying snorkel gear, explore this article!

How Can I Properly Store The Snorkel Gear?

You need to store the equipment properly when not in frequent use, especially the mask. Ensure that you let the snorkel gears dry out properly after you are done with the cleaning process. Also, you need to treat the gear with utmost care and ensure that the fins, tubes, and masks are not together within a bag.

It might give rise to scratches. It is better to store them in different mesh bags and place them in dry, dark, and cool places. This, in turn, will prevent the snorkel gear from damaging due to moisture and exposure to the sun. 

Conclusion

Now that you are aware of the methods and steps of cleaning your snorkel gear, you can ensure its longevity and durability. It is a must for you to keep the gear and its components clean. You do not want your health to face adversity while you are excited about exploring underwater beauties.

Hence, in conclusion, you must know that cleaning snorkel gear ensures quality & safety within the sport. Clean out the equipment or components, both before and after snorkeling. 

How To Clean Dirt Bike Air Filter

Man riding his dirt bike in a cloud of soil

The air filter in a dirt bike is a crucial component responsible for maintaining engine life. It prevents sand, pebbles, or dirt from entering the engine. A dirt bike mostly runs on off-roads with many foul air intakes.

This is taken care of by the air filter inside the bike. So, a dirty air filter is responsible for suppressing the airflow to your engine for cooling it down.

How To Clean Dirt Bike Air Filter

A dirty air filter will also fail to prevent debris or dirt from entering the engine. Therefore, cleaning it is crucial, and there are techniques for you to do the same. Remember that the air filter doesn’t need cleaning after every ride. However, it is better to do regular cleaning after completing your ride in sandy areas.

Close up of a dirt bike engine

Keep a check on the air filter of your dirt bike as part of your maintenance routine. Following that, learn how to clean dirt bike air filter on your own.

Method 1: Clean With Washing Powder & Warm Water

Surely you will get washing powder and warm water in your home easily, so this method is very convenient too.  It is the best proficient way to revive the airflow to your bike’s engine by cleaning the air filter. Go through the steps to make a rightful approach and start cleaning. 

Step 1: Clean Around Air Box & Take out the Air Filter

  1. Wear latex gloves on priority before commencing with the cleaning process.
  2. First, clean the area around the airbox.
  3. Take the air filter out gently without letting any robust muck falling into the air intake chamber.
  4. Place a clean rag around the air intake chamber when it is exposed without the filter on.

Step 2: Prepare Warm Water & Washing Powder Solution

  1. Make a mixture of washing powder and warm water.
  2. Then, dip the air filter and rinse it directly in that solution.
  3. In case you have used a specific type of oil over the filter, you will need to dissolve that oil in mineral turpentine solution first. And then, you can clean it in the prepared washing powder and warm water solution.

Step 3: Squeezing & Cleaning The Air Filter

  1. Squeeze out the excess water off the air filter.
  2. Dry it properly in a clean concrete under direct sunlight.
  3. In the meanwhile, clean the airbox.
  4. Clean dirt & dust stuck in that chamber as well.
  5. Use a brush to take out the solid debris off the airbox.

Step 4: Apply Oil & Grease To The Air Filter

  1. Buy the filter oil that you think is best for your bike.
  2. Squirt the oil in a plastic bag.
  3. Now, chuck in the filter to give it a good massage and squeeze.
  4. Once it is soaked, wring out all the excess oil in the plastic bag.
  5. When there are no heavy patches of oil anymore, let it dry for around 30 minutes.
  6. Apply some grease around the air filter rim, which will act as a good sealant.

Step 5: Place The Filter Back To Its Position

  1. Screw back the filter to its plastic cage.
  2. Check for the positions of the screw holes and place the screws accordingly.
  3. Run your hands or fingers alongside the filter circumference to ensure that there is a complete seal.
  4. Now, ensure that you properly set back the air filter to ensure that its functionality is not hampered.
Man cleaning his dirt bike

Tip!

While cleaning the air filter manually, it is also advisable to check for tears or holes. In case you observe any damage, then it is better to replace the filter right away. However, do not take the risk of damaging the bike engine just for the sake of saving few bucks on a new filter.

Get a better idea of how to implement the above steps through this YouTube video. Moreover, this video explains how to open up your motocross bike, take off the filter and clean it efficiently.

Method 2: Clean With Commercial Cleaner

Prefer to check the owner’s manual of your bike before you go ahead and clean the air filter. There might be some specific instructions to help you with better cleaning & maintenance.

Sometimes these manuals give details of chemicals that you need to avoid for the cleaning purpose. Therefore, before opting for any specific commercial cleaners, go through the manual.  Get one as per your requirements on any online or offline store and then follow the steps:

Step 1: Remove The Air Filter From The Bike

You need to remove the air filter from its chamber safely. Now, cover the air intake box with a clean rag to avoid exposure to open-air while the filter is out. For removing the filter, you might have to remove the housing and wing nuts over it. Now, take off the plastic cage that is holding the air filter for easier cleaning.

Step 2: Apply The Commercial Cleaner Solution

  1. Buy a commercial cleaner that is explicitly meant for dirt bike air filter cleaning.
  2. It is better to get a solution that works both as a cleaner and degreaser.
  3. Spray the entire air filter surface with this solution.
  4. Keep spraying until the air filter is drenched with it.
  5. Let the solution soak into the filter for few minutes.

Step 3: Rinse The Air Filter With A Garden Hose Or Faucet

  1. When the solution has soaked in, you must rinse it thoroughly now.
  2. Use a garden hose to rinse the air filter inside out.
  3. Rinsing from the inside out will prevent the pushing of dirt further into filter fibers.
  4. Continue rinsing the filter with a hose until you see clean water flowing through the filter.
  5. Repeat the spraying process, if necessary.
  6. Do not prefer stretching the filter, as it might tear off easily.
  7. Shake off any loose water from the dirt bike air filter, and set it to dry.
  8. Please wait for it to be completely dry before moving onto the next step.

Step 4: Spray Oil Over The Air Filter

  1. When dry, you can now spray filter oil on each pleat of the filter.
  2. Let the oil soak in for around 20 minutes.
  3. Squeeze out excess oil off the surface.
  4. Connect the filter back to its plastic cage and housing.
Man riding his dirt bike in a cloud of soil

Frequently Asked Question

How Often Should I Seek Cleaning Of My Dirt Bike Air Filter?

The riding conditions and levels are responsible for determining how often you should clean the air filter in your dirt bike. For example, if you are constantly riding on muddy tracks, then you need to clean the air filter every single time after a ride. If there is mud on the track, there is mud on your air filter too. So, go ahead and clean it.

Furthermore, if you are a professional rider who needs to go on bigger spins on muddy tracks every day, regular cleaning and possible replacements must be done. On the other hand, if you are a leisure biker who takes the dirt bike only for short spins on off-road tracks, cleaning once every three days is enough. For more knowledge about it, refer to this article.

What Are The Things That I Should Keep In Mind While Cleaning Dirt Bike Air Filters?

There are dos and don’ts for cleaning air filters. However, among all of the important things to consider while cleaning dirt bike air filters, there is a crucial one. It is that you should not use gasoline to clean these air filters ever.

This strips down the air filter foam, which will lead you to replace it over time. Keep it in mind, and for other such considering factors or things, check out this blog on air filter maintenance.

How Much Does A New Dirt Bike Air Filter Costs?

A new dirt bike air filter costs around $20 to $30, depending upon the model and brand of the bike. You can check out the exact price on the website of the companies.

Conclusion

Bikers do understand the importance of air filters in their bikes. While air filters are not just preventers of sands, pebbles, and dirt, but they also offer assistance for internal combustion. For instance, oxygen is an essential element for internal engine combustion, and an air filter feeds the engine with it.

Therefore, keeping the filter clean is a priority, and the above methods can help you do it all by yourself.

How To Clean A Fireplace Insert

Fireplace being used

Fireplace inserts became popular back in the 1970s, during the oil crisis in the US. Wood being readily available in those days, homeowners were asked to promote wood-burning insert in the fireplace to save some money. And since then, the popularity of such inserts is unstoppable.

However, people have raised concerns that the maintenance and cleaning of a fireplace insert require too much effort.

How To Clean A Fireplace Insert

Cleaning the fireplace insert might seem tiring with the traditional methods. But, when you master the techniques, you realize the convenience. It is because poor maintenance can lead to house fires and even worse scenarios. Therefore, you need to learn how to clean a fireplace insert.

Living room with a fireplace in need of cleaning

Method 1: Cleaning With Liquid Dishwashing Soap & Baking Soda

The more often you clean your fireplace insert, the easier it will be for you to maintain it over time. So, it would be best to keep in mind that you can’t ignore the cleaning process because it is a dirty job. It’s been noticed that many people do not wish to put their hands into it.

But, professional fireplace insert cleaning comes at a high price. Hence, get your hands dirty and do it yourself to save some bucks.

Step 1: Prepare The Area To Limit The Cleaning Mess

  1. You will need newspapers or a plastic tarp for this purpose.
  2. Spread either several layers of newspapers or a plastic tarp on the fireplace front.
  3. It is to keep the floor neat while executing the cleaning process.
  4. Now, clear out all the grates, tools, and woods from the area before proceeding further.

Step 2: Scoop Out The Debris Or Ash

  1. You will need a small shovel for this purpose.
  2. Use it for scooping out any of the debris or ash within the fireplace.
  3. Check for large piles of dust & dirt. (Regular cleaning will eliminate the piling of debris or dust)
  4. Now, use a vacuum cleaner with a hose attachment for cleaning the surroundings and inside area of the fireplace.
  5. The goal of this step is to remove all the loose debris from the fireplace.

Step 3: Scrub Inside Area of The Fireplace Insert

  1. You will need one heavy-duty brush with wires and a small wire brush for the purpose.
  2. Preferably, use a heavy-duty brush for scrubbing the inside region of the fireplace.
  3. Pay a little more attention to remove all the baked debris or creosote from inside.
  4. Now, use a smaller wire brush for removing debris and dirt off the insert door & hinges.
  5. Loosen all the debris or dirt stuck around the exterior.
  6. Now, use a vacuum cleaner to suck out all of the loosened dirt, debris, and creosote.

Step 4: Prepare Soap & Baking Soda Solution

  1. Take one gallon of water in a large container
  2. Add a teaspoon of dishwashing soap to it.
  3. Now, add a half-cup of baking soda into the mixture.
  4. Mix the solution well.

Step 5: Clean Fireplace Insert with The Solution

  1. You will need a rag for this.
  2. Submerge the rag into the cleaning solution.
  3. Now, use it to scrub inside and outside of the fireplace insert.
  4. Do the scrubbing thoroughly, and concentrate while scrubbing the vents and grates.
  5. Keep repeating the process by changing rags when one gets too dirty.
  6. Remove all the gunk from in and around the fireplace insert using the solution.
Fireplace being used

Step 6: Rinse With Clean Water

  1. Keep another bucket full of clean water right beside you.
  2. Use clean rags to rinse the fireplace insert with the help of water. 
  3. Rinse the surface thoroughly to remove remnants of baking soda and dishwashing soap solution.
  4. Use a clean cloth to dry the fireplace insert afterward.
  5. It would be best if you used multiple clean and dry cloths to soak out all moisture thoroughly from the fireplace insert.

Step 7: Clean Glass Features With White Vinegar

Glass features of the fireplace insert need separate cleaning as they are delicate to handle. Here’s what you need to do for cleaning them:

  1. Fill white vinegar solution in a spray bottle.
  2. Spray it over the glass features of a fireplace insert.
  3. Use a microfiber cloth to remove dirt, dust, debris, and grime off the surfaces.
  4. If the debris is caked, you need to brush it out before using cloth and its solution.

After this cleaning method is complete, you can discard all the newspapers or the plastic tarp. Now, you can place back the tools, logs, and grates to their original spots. Do a final vacuuming around the fireplace insert to suck out any leftover mess.

Tip!

Check for the warranty on your fireplace insert. In case your warranty still exists, you do not need to attempt any cleaning measures. The company will do it as per warranty rules.

Get a better idea of the cleaning steps by taking a closer look at this video which describes the thorough process.

Method 2: Cleaning With Soap, Salt & Water

If you wish to carry out an even easier cleaning method, then soap, salt & water will do the job. Check out the below steps:

  1. Spread newspapers on the fireplace insert front.
  2. Mix equal parts of soap and salt into the water in a container.
  3. Stir it well until it forms a creamy cleaning solution.
  4. Ensure that the mixture is not watery and is a paste.
  5. Use a towel to coat this paste on the bricks.
  6. Let the paste soak for around 10 minutes.
  7. Use a brush with firm bristles for scrubbing the bricks.
  8. It will clean off the dirt, dust, and caked debris off the fireplace insert.
  9. Now, rinse the surface with clean water and a clean rag.
  10. Rinse it thoroughly to remove remnants of the cleaning mixture.
  11. Use a clean towel to dry the insert.
  12. Throw away the newspapers after the cleaning process.

Method 3: Cleaning An Electric Fireplace Insert

Nowadays, electric fireplace inserts are also in trend. Also, the cleaning process is different from that of wooden inserts. Electric fireplace inserts are vent-less, as they do not need any outside ventilation.

Electric fireplace

They run on a power supply and are pretty easy to install & maintain. And, if you have an electric one, then this guide has got you covered as well. Here are the steps for cleaning:

Step 1: Disconnect It From The Power Supply

  1. Ensure that you have disconnected the electric fireplace insert, few hours before the cleaning session.
  2. It is to allow the insert to cool down, thereby making it easy for you to clean.
  3. It is better to remove the plug from the sockets, to avoid any risk of shocks.

Step 2: Cleaning Of The Heater or Insert

  1. Start cleaning with the inside of the electric heater.
  2. Use a clean & dry cloth. (Preferably cotton).
  3. Wipe the surface wall of the fireplace insert.
  4. Keep the wiping motion a bit gentle.
  5. Now, use a soft brush for cleaning the outlet of the electric insert.
  6. Remove all the carbon residues and robust debris from the surface.

Step 3: Cleaning Of The Glass Features

  1. Check the user manual to remove glass panels from the insert.
  2. Now use a soft cotton cloth to wipe both sides of the glass.
  3. Avoid using abrasive wipers or strong cleaners on the glass body.
  4. Use a soft duster to dust off the dirt and dust.

There isn’t much necessity of any cleaning solution for maintaining the electric fireplace inserts. It is because they do not accumulate caked debris like the wooden ones. Therefore, simple and routine cleaning is sufficient for the purpose.

Frequently Asked Questions

Can I Use Water To Get Rid Of Running Fire Right Before Cleaning The Insert?

No, you should not douse the fire with any liquid until it’s an emergency. If you are extinguishing fire with water, it will turn the ashes into a paste that will be very difficult to clean. For more such tips on cleaning the fireplace insert, you can check out this link.

How Frequently Should The Fireplace Insert Be Cleaned?

You must clean the fireplace insert thoroughly, at least once every year, if you are using it only in winters. However, if you live in a cold region where you need a fireplace insert throughout the year, you might have to clean it more than once in 365 days. But in most cases, it is better to get the fireplace insert clean before the burning season.

Conclusion

Take up the opportunity to save money on hiring professionals by carrying out the cleaning process of the fireplace insert all by yourself. Don’t wait and start the cleaning process! This guide will help you keep the fireplace insert clean to avoid any fire hazards due to creosote glaze or soot build-up.

How To Clean A Lasko Blower Fan

A Lasko blower fan comes in different shapes, sizes, and features; thus, the cleaning process also changes depending on the fan we are dealing with. If the fan is not maintained daily, the dust accumulates to create debris inside, and one starts to wonder how to clean a Lasko blower fan with such a compact structure.

How To Clean A Lasko Blower Fan

Lasko fans usually come in enclosed and compact designs; thus, cleaning them has always been challenging. We are here to the rescue; in this article, we will be covering every type of Lasko blower fan to make your cleaning process easy and comfortable.

Materials Required

  • A set of flexible brushes, if you are not up to disassembling the fan.
  • Duster
  • A disinfectant spray or disinfectant wipes for keeping the air passing through the fan completely germ-free. 
  • Screwdriver
  • Vacuum cleaner (Electronic)
  • A small bowl to keep all the small pieces of hardware safe in one place.
  • An air compressor
  • A soft cloth
  • Multipurpose oil
  • Vinegar or rubbing alcohol

Cleaning A Lasko Tower Blower Fan

A Lasko tower fan was designed to provide air at a massive velocity in a compact structure.

However, cleaning a Lasko tower blower fan is not the easiest task as the design is compact. Thus, it might need some extra attention when it comes to cleaning.

  1. Begin with unplugging the fan and plug the brush cleaner into your vacuum cleaner; if you do not have a vacuum cleaner, you can move forward with using a brush set to remove the dust from the fan.
  2. Start with vacuuming or brushing the intake grill and remove the dirt from the grill.
  3. Now take any soft cloth (microfiber is highly preferred) and clean the outer fan housing. 
  4. If you see any stains or spots, put some vinegar or rubbing alcohol on the soft cloth and gently rub on the stained area. 
  5. Keep rubbing until the stain is completely gone.

The method of cleaning the Lasko tower mentioned above is preferred if you want to avoid disassembling the fan.

If you want to deep clean and move forward with disassembling the fan, here is the link to the video guide to help you in the cleaning process.

Cleaning A Lasko Pedestal Blower Fan

Pedestal fans are really popular in the hot regions of the country, as they are a pocket-friendly option and are easy to maintain. Thus cleaning a Lasko pedestal blower fan is an essential task because of its extensive usage.

Here are the steps you need to follow.

  1. Since a Lasko pedestal fan is a bit larger than a tower fan, it will need disassembling. Start with opening the rear and front grills; if you need assistance, please refer to the product’s manual for disassembling.
  2. Once the disassembling is done, start with cleaning the blades and grill. Add some water and some liquid soap to the bowl and dip the blades in it.
  3. For the other parts of the fan, use the damp microfiber cloth for cleaning. Use some vinegar or rubbing alcohol for the stained parts of the fan.
  4. Now take the grill and blades of the fan and start rubbing with a flexible brush to remove the dirt and debris.
  5. Once the scrubbing is done, wash the grill and blades and leaves them to air dry before you start to reassemble. 
  6. Ensure you do not touch the motor during the cleaning process, as the water will undoubtedly ruin the motor.

In most of the cleaning processes, we usually suggest using a microfiber cloth to remove dust and dirt.

The cloth has several pros when it comes to cleaning; here is the link to a study highlighting the cleaning properties of the microfiber cloth.

Cleaning A Lasko Box Blower Fan

A Lasko box fan is a lower-cost option than a Lasko pedestal fan. It is a high-efficiency fan, primarily used at home because of its easy-to-use design.

Since the fan is a high-performance fan, it is time to move forward with cleaning a Lasko box blower fan to keep it in the best shape at home.

  1. Cleaning a box fan is nearly impossible without disassembling; thus, begin with opening the four screws of the box present at the perimeter of the front grill.
  2. Since the grill is completely removed, now you can remove the blades by gently rocking the side of the blade to side and pulling up.
  3. Fill a bowl with some water and add a few drops of soap to it.
  4. Now dip the microfiber cloth into the bowl and start cleaning the blades and the grills. You won’t need a brush this time.
  5. After cleaning, give a quick wash with clean water and let it dry.
  6. Once the fan is completely dried, start to reassemble the fan.

Cleaning Of A Lasko Window Blower Fan

A Lasko window fan is one of the finest creations, as it has multiple features, but it does not create any extra noise along with those features.

The fan is extremely quiet in terms of use; thus, you must never miss the regular cleaning of a Lasko window blower fan to maintain this quality.

  1. The fan needs disassembling; thus, make good use of your screwdrivers, remove the fan from the window, and place it up on the floor.
  2. Now remove the screws and lift the grill cover from the main body of the fan.
  3. Take the microfiber cloth and remove the dust and debris from the grill and the blades.
  4. Add some water to the bowl along with a few drops of liquid soap and dip the microfiber cloth in it.
  5. Now use the damp cloth to clean the fan’s internal parts, including the panels, knobs, grates, and blades.
  6. Once the cleaning is done, leave them to dry and then reassemble.

A Lasko window fan needs much more regular cleaning than the other fans, as they accommodate a comparatively larger amount of debris as they are placed on the window.

Cleaning A Lasko Wind Machine Blower Fan

A Lasko wind machine fan comes in different shapes and sizes, but this fan also demands disassembling when cleaning.

In addition, it might be tough to maintain these fans regularly considering the structure; that is why we are discussing an in-depth process of cleaning a Lasko wind machine blower fan, as it will be done once in a while.

  1. Take the fan and place it on the floor. Now start removing the screws by using a screwdriver, and do not forget to remove the knobs.
  2. Once the screws and knobs are removed, take out the grill and give the blades a good wipe with the microfiber cloth to remove the dust and debris.
  3. Add some water to a bowl and put a few drops of liquid soap.
  4. Now dip the cloth into the bowel and start scrubbing the fan to remove stains and extra dirt.
  5. Now wipe it clean and let the blades and grill air dry.
  6. Once the parts are completely dried, start to assemble them.

Lubricating The Motor When It Squeaks

In the above paragraphs, we have talked about cleaning the blades, grills and maintaining the quality of the fan, but what about the motor.

When the motor starts to squeak, it needs some lubrication, and thus in this section, we will discuss lubricating the motor when it squeaks.

  1. First of all, start with turning off the fan to block the electricity flow.
  2. Unscrew the fan and remove the cage.
  3. Unscrew the lock bolt and remove the blades from the metal shaft.
  4. Now spray the oil around the holes in the shaft using a fine tube.
  5. Now wipe off any extra oil and put the blades back on.

Frequently Asked Questions

Do Lasko Fans Produce Cool Air?

Lasko fans do not have any type of cooling mechanism installed in them. Thus, they do not produce any type of cool air. If the fan is placed in front of an air conditioner, it might be possible, but otherwise, it is entirely impossible.

How Can I Reset My Lasko Fan?

To reset a Lasko fan, try switching off the main power of the fan and leave it like this for at least 15 minutes. Now take the fan into a new room and a new power outlet and see if the issue gets resolved. If not, please call customer service.

Conclusion 

The first and foremost thing to remember about cleaning a Lasko fan is that the process changes depending on the type of fan you are cleaning. Regular cleaning of the fan provides you and your family a good air quality and saves you from any extra manual work. Always be careful while cleaning; make sure the fan is switched off.

How To Clean A Leather Purse from A Thrift Store

Perfume, notebook, wallet, ballpen and a sunglass are spilling out of a leather purse

Fast fashion is on the rise, and it is deteriorating our planet day by day. Thrift stores are a boon in this time of environmental crisis. Thrift stores are sustainable and affordable but not always clean.

And cleaning them can be a task, more when its leather. Solet’s discuss how to clean a leather purse from a thrift store.

How To Clean A Leather Purse From A Thrift Store

Thrift stores are a blessing, especially when you want to stay in trend and do not want to spend much money to buy those fashionable items. Cleaning a leather purse might sound a bit scary, as leather is one of the most sensitive materials to work with, but we can assure you it is an easy and quick process to go through.

Leather purse placed on the grass

Pick Up A Good Quality Bag From A Thrift Store

If you want to do a successful clean-up for the leather bag you bought, you have to make sure that it is in the best condition when you buy it from the thrift store.

Here are some pointers that you can look out for:

  • First, look out for stains on the leather of the purse.
  • Second, make sure the leather is in good condition; keep an eye on the torn pieces of the bag.
  • Finally, make sure all the zippers are functioning correctly.

You need to look out for the points mentioned above, as if you buy a highly damaged bag, it will be really difficult to get good results even after cleaning the bag.

Also, once the payment is made for the bag, there is no chance of returning it at any cost.

Materials Required

Before moving on to the cleaning process, let us get the ingredients required to keep the cleaning process seamless and easy.

Here is the list of materials required for cleaning your leather bag from a thrift store:

  • Some clean water in a bowl: water and leather are not a very good combination for cleaning, but we can use the water sparingly while cleaning the purse.
  • A few clean pieces of rag: You can source this item from your old clothing or towels. The fluffier the cloth, the better are the results; make sure the clothes are colorless, as they might leave the color while cleaning.
  • Leather Shampoo: Well, we can not clean leather with ordinary shampoo. Since leather is sensitive material, a good quality leather shampoo will work well during the process.
  • A good disinfectant: We do not know where the bag came from and where it was initially stored; thus, to ensure that it is bacteria-free, buy a good disinfectant spray or liquid.
  • Leather recoloring balm: Since it is a second-hand purse, there may be some discoloration on the bag; thus, to restore the color of the bag, you will need a good quality leather recoloring balm.
  • Leather Conditioner: Now, to make the leather feel soft and tender after the cleaning, you will need a leather conditioner to make your bag last longer and make the leather firm.
  • Leather protecting finish: After the cleaning process, you might want to protect the leather from water or any damp environment; that is where leather protecting finishing comes into the picture.
Perfume, notebook, wallet, ballpen and a sunglass are spilling out of a leather purse

Step 1: Get Rid Of The Stuff From The Previous Owner

Before you begin the cleaning, you might not want anything that belonged to the previous owner with you.

Thus, the first step is to get rid of the stuff from the previous owner.

  • Typically, the thrift stores make sure that there are no items in the bag from the previous owners but double-check to make sure.
  • There can be cards, wooden combs, receipts, or other small items in the bag, so pour them out in the trash compartment.
  • You might need to unstick some items from the bag by hitting them.

Step 2: Wiping Off The Dust

Once you are done with getting rid of the stuff from the previous owner, it is time to start working on the bag. Start with wiping off the dust from the leather bag.

Here are the steps you need to follow:

  1. Take a small piece of rag and start wiping the outer and inner surface of the leather bag.
  2. Always shake the bag after cleaning one compartment of the bag. Make sure all the compartments of the bag are cleaned properly.

Step 3: Cleaning With An Anti-Germ Wipe And A Damp Cloth

Once you have wiped off the dust, it is time to get rid of the germs from your beloved leather purse. Now you have to move on with cleaning the purse with an anti-germ wipe and a damp cloth.

Here are the steps you need to follow:

  1. Take a clean anti-germ wipe and clean the inside and outside of the leather bag. One wipe will be enough to cover the whole bag.
  2. Now take a small piece of rag and dip it into water. Now squeeze it to remove extra water from the rag. 
  3. Now concentrate your efforts on the stained areas; make sure you do not apply a lot of pressure while you go about this step.
  4. Now put the purse into a ventilated area to let it dry.

If you can remove the stains in this step, you can apply leather conditioner; if not, you need to follow the next step.

Step 4: Cleaning The Purse With A Leather Shampoo

If you cannot remove the stains from the purse in the previous step, it is time to upgrade our cleaning tools.

Now you need to start cleaning the purse with a leather shampoo to get rid of those stubborn stains from the leather bag.

Here are the steps you need to follow:

  1. Take a small amount of leather shampoo and apply it to the outer surface of the bag. Now take an old toothbrush and concentrate your efforts on the stained area.
  2. You will observe lather coming from the scrubbing action, and it will pull out the dirt. Make sure you do not scrub too hard.
  3. You can spend about 30 seconds on each spot, and you will observe a smooth surface emerging on the bag.
  4. Once the scrubbing is done, take a damp cloth and clean the purse.
  5. Now keep the purse in a ventilated area and let it dry.

Here is a link to a study concentrating on the qualities of leather and its cleaning.

Step 5: Removing Scratches From A Leather Purse

Since the stains are being removed, the surface of the leather will become pretty smooth, as any loose strands of leather are being removed by scrubbing action.

Man taking a photo of the landscape while carrying his thrifted leather purse

If you observe any kind of scratches on the purse, this step is a must.

Here are the steps for removing scratches from a leather purse:

  1. Take the purse and observe for any discoloration and scratches on the surface.
  2. You can move forward with using a spatula to remove a little amount of leather recoloring balm and apply it to the respective area.
  3. Ensure the recoloring balm is applied evenly on all the areas, and more pressure should be applied on the scratched ones.

You can move forward with applying a few coats of the recoloring balm to make sure you get your desired look.

Step 6: Applying The Conditioner And The Protector Finish

Since the discoloration and the cracks have been taken care of by the balm, it is time to move forward with the final step, applying the conditioner and the protector finish.

Here are the steps you need to follow:

  1. Take a clean piece of white rug and put some conditioner on it. Now apply the conditioner evenly on the surface of the bag.
  2. Wait for at least ten minutes and then take another clean piece of rag and move forward with applying the protector finish on the outer surface of the leather bag.
  3. Now your leather bag is good for use.

This step will protect the bag from water and other damp environments and give that shiny look you desire.

Frequently Asked Questions

Is It Safe To Buy A Leather Bag From A Thrift Store?

Yes, it is completely safe and healthy to buy a leather bag from the thrift store; just check the bag thoroughly before buying it and clean it before using it.

Can I Get Good Quality Items From A Thrift Store?

Yes, you can buy good quality products from a thrift store, as they check it thoroughly before selling.

Conclusion 

Thrift stores are a blessing, especially if you are going through a financial crunch. However, it is not about class all the time; sometimes, you need to be mindful while shopping, think about the clothes that are dying in your closet, and creating unnecessary waste on the planet. It is time to take responsibility and go thrift shopping.

How To Clean A Drum Set

Close up of a drum set

Everybody desires an excellent shiny drum set, as it gives you a different type of environment and motivates you to play your best tunes. But cleaning a drum set might seem like a challenge as it is massive and has a complex composition. Thus, the question arises of how to clean a drum set in the best way possible.

How To Clean A Drum Set

A shiny drum set is attractive to the audience; thus, keeping it clean is the drummer’s responsibility as it shows that you respect your instrument. Likewise, if you appreciate your instrument, the music will respect you. Hence here are the steps you need to follow to keep your drums in the best shape possible.

Materials Required

Wiping off the dust might take a few seconds, but dealing with the debris is not that easy.

Person playing drums

You will need your cleaning ammunition to get the best results. Here is the list:

  • A microfiber cloth or a terry
  • A one-inch brush
  • A 0.5-inch brush
  • A wood conditioner or polish (lemon oil)
  • A non-abrasive chrome polish
  • A mild lubricant for the moving parts
  • Some masking tape
  • Petroleum jelly

Step 1: Disassembling Your Drum Set

The first and the primary step to deep cleaning is disassembling your drum set. It will give you a proper space, and each inch of the drum set will be thoroughly cleaned.

  1. Start with loosening up each part of the drum set and group them accordingly so that none of the parts get lost.
  2. Make sure you separate the metal and the wood parts, as a different method is used to clean depending upon the nature of the material of the parts.

Here is the link to a video guide showcasing how to disassemble a drum set and reassemble it after cleaning.

If you avoid this step, the shine that you desire might not be achieved. 

Step 2: Brushing Off The Rims

Once you are done with disassembling the drum set, you need to move forward with the next step, brushing off the rims. Here are the steps you need to follow:

  1. Take your one-inch brush and start removing the chipped wood pieces from the rims of the drum set.
  2. Go for a 0.5-inch brush if there are nasty pieces of debris stuck around the rims, as they won’t go off easy with a 1-inch brush.
  3. You need to follow this step with your toms and the snare drum.

Here is the link to the study about snare drum written by Vic Firth; it concentrates on the methodology followed in the classical and modern form of music, keeping in perspective the usage of the snare drum.

Step 3: Polishing The Rims, Cymbals, And Hardware

After brushing off the dust from the rims, it is time to move forward with polishing the rims, cymbals, and hardware.

Again, avoid using any type of non-abrasive polish on the wooden parts, as it might compromise the quality of the wood on the drum set.

  1. Cover the wooden parts with masking tape, take some non-abrasive chrome polish, and dispense a little amount on the terry or microfiber cloth.
  2. Now take the microfiber cloth and start spreading the polish gently on the metal parts of the drum set.
  3. Make sure the polish is spread evenly, and use an extra amount if needed. Once you are done spreading, clean the polish with a clean terry or microfiber cloth, it will give the metal parts a good shine.
  4. Follow the steps mentioned above for the top rims, bottom rims, cymbals, and other drum set hardware. Do not use this method on the snares.
  5. Keep an eye on the tight spaces and make sure the polishing cream does not get assembled in the tight spaces and leave nasty stains.
Disassembled drum set beside a potted plant and guitar

Here is the link to a study highlighting the features of microfiber cloth and why it is best for cleaning various materials such a the surface of a tinted window and titanium rings.

Step 4: Polishing Your Toms, Snares, And Bass Drum

Once you are done polishing the rims, cymbals, and hardware of the drum, it is time to put your focus on polishing your toms, snares, and bass drum.

Here are the steps that you need to follow:

  1. Since a non-abrasive polish cannot be used on the wooden parts, take a different microfiber cloth for the wooden parts of the drum set.
  2. Now remove the masking tape that you used to cover the wooden parts of the drum set.
  3. You can use any wooden conditioner or a lemon oil polish that gives the wood a good protective layer for the wooden parts. Lemon oil is a better option, as it does not leave any uneven stains.
  4. Dispense a little oil on the microfiber cloth and start spreading on the wooden parts of the drum set.
  5. Once the oil is evenly spread, take clean terry or microfiber cloth and remove the excess oil from the surface. You will see that good lustrous look after the clean wipe.

Wooden parts are a bit sensitive to deal with; make sure you use mild products and a good brand.

A wrong product can compromise the quality of the wooden parts that, in short, deteriorates the quality of the whole drum set.

Step 5: Reassembling Your Drum Set

Once the cleaning and polishing are done, it is time to move forward with reassembling your drum set.

After cleaning, it is more of a challenging part to build the whole drum set back.

Here are the tips and tricks that you need to follow before reassembling the drum set:

  1. Make sure you use some petroleum jelly on the lug screws. It will help in preventing any cross-threading while reassembling.
  2. While reassembling the drum set, make sure each part is carefully tightened to make it fit correctly. Each screw should be finger-tight.
  3. Next, gather some appropriate tools to reassemble the hardware of the drum set.
  4. Once you are done with the tightening and assembling, make sure you do not leave any fingerprints on the drum set. Give a quick clean with a microfiber or terry to ensure the quality.

Step 6: Tuning Your Drums

During the cleaning process, you might have detuned your drum set. Hence, make sure that you properly tune your drum set before playing.

Also, do not forget to take a selfie with your drum set after such hard work.

Close up of a drum set

Pro Tips and Tricks For Maintaining A Clean Drum Set

Cleaning a drum set is an exhausting process. Thus it is impossible to clean it now and then.

Thus, maintenance is the key; here are some pro tips and tricks for maintaining a clean drum set:

  • Make sure to add a packet of dehumidifiers inside the toms, bass drums, and the snare when you change the drum skin.
  • If you are using steel wool to clean your hardware, use a polishing grade like #0000, as more course grades will result in scratches and might throw a bit of debris.
  • Place your drum sets in dry and cool areas to avoid mold and mildew, as they form at a thriving rate in moist environments.
  • Make sure the inside of your drum is arid. Otherwise, an organism might start living in your drum set, and nobody wants that.

Drum sets expect a lot of physical effort when cleaning and maintaining the quality of the instrument, but it is all worth it, as a lustrous and shiny instrument can produce the best music.

Frequently Asked Questions

How Can One Know If The Drum Set Is Good?

Here are few points to look out for a while buying a good drum set. First, find a balance between the cost and the quality of the drum set. Keep a good eye on the hardware of the drum set, make sure it is solid, and prefer buying a bundled hardware.

How To Take Care Of An Electronic Drum Set?

Taking care of an electronic drum set is pretty easy. Always clean with a soft cloth. In case of stains, use a damp microfiber cloth for cleaning. Do not use alcohol-based products on the module. Avoid placing any vinyl products on the module.

Conclusion 

A deep clean of the drum set might take a huge chunk of your day, but it is necessary to clean your drum set at least once a month to maintain its quality. If you cannot afford a monthly cleaning session, make sure you follow the steps in parts. It will ease up your cleaning hours and maintain the quality of the instrument as well.

In addition, a regular cleaning session can save you from that long day of physical effort.

How To Clean Chalky Plastic Lawn Chairs

Red and blue plastic lawn chairs surrounding a fire pit

The people living in the warmer regions of the country might understand the value of having pretty lawn furniture in their homes. However, maintaining the beauty of the furniture is a bit of a challenging task; the sun usually results in the chalky look of the furniture. Therefore, to keep your plastic lawn chair in the best shape, it is essential to learn how to clean a chalky plastic lawn chair in the summers.

How To Clean Chalky Plastic Lawn Chairs

Your plastic chair might lose some charm with the passing time, as the UV rays seem to harm the chair’s color. However, it can be restored. In this article, we will discuss various methods that you can use for cleaning your chalky lawn furniture.

People wearing masks while sitting on white plastic lawn chairs

Products That You Can Work With

There is no one hard and fast rule when it comes to treating a chalky lawn chair. Thus the products mentioned below are going to support one methodology.

  • Plastic rejuvenator
  • Mild abrasive cleaner and car wax
  • WD-40
  • Vaseline
  • Heat gun
  • Spray paint

These products can be easily bought from a store, and they also speed up the cleaning process for a chalky lawn chair.

You choose the product of your choice depending on your budget.

Method 1: Using A Plastic Rejuvenator

Various products can be used to go about treating a chalky plastic lawn chair. So let us begin with discussing using a plastic rejuvenator to treat a chalky plastic lawn chair.

Here are the steps that you will need to follow:

  1. Take a small bucket of water and add some detergent or mild soap to it.
  2. Now clean the chair using a mild scrub by applying pressure in a circular motion.
  3. Now wash the chair with clean water and let it dry. 
  4. Now take a soft cloth or a microfibre cloth and put some plastic rejuvenator on it.
  5. Now wipe the chair with the microfiber cloth to spread the rejuvenator even;y on the chair.
  6. Let the chair dry outside and see if the chair needs a second coat.

Do not forget to read the instructions before applying the plastic rejuvenator, as the instructions might change depending upon the brand of the rejuvenator.

Method 2: Using A Mild Abrasive Cleaner And Some Car Wax

Suppose you are not interested in moving forward with the plastic rejuvenator thing.

In that case, you might be interested in using a mild abrasive and some car wax to restore your chalky plastic lawn chair this summer.

Here are the steps that you will need to follow:

  1. Take a bowl and mix ½ cup of baking soda into 1 gallon of clean water.
  2. Now rinse your plastic lawn chair with this solution and let the chair dry.
  3. Now read the instructions on the car wax container and apply the coat accordingly on the chair.
  4. Once the chair has completely dried, you have to buff the wax away.

If your chair is quite dirty and has many stains, sprinkle a little baking soda on your sponge, scrub the chair until the stains are entirely removed, and then rinse the chair.

Method 3: Using WD-40 

WD-40 is one of the most unusual elements one can think about when cleaning a chalky plastic lawn chair.

The package comes with an instruction manual, or you can also read it on the official website.

Here are the steps you will need to follow for using WD-40 on your lawn chair:

Red and blue plastic lawn chairs surrounding a fire pit
  1. Take some water in a small bucket and add some baking soda and mild soap to it.
  2. Now rinse the chair well with a sponge and scrub the chair in a circular motion.
  3. Give the chair a good clean with some clean water and let it dry.
  4. Now spray some WD-40 on the plastic lawn chair and spread it with a microfiber cloth.
  5. Now take a clean, soft cloth and wipe the extra WD-40 off from the chair.

Here is a link to the video guide for cleaning a chalky plastic lawn chair with WD-40

Method 4: Using Vaseline To Clean The Plastic Lawn Chair

Vaseline is one of the most pocket-friendly cleaning items that are available in our household. It is easily available in the market and does not require any special instructions for the application.

Here are the steps that you will need to follow for using Vaseline to clean the plastic lawn chair:

  1. Take a buck and add one gallon of clean water to it. Now mix at least ½ cup of baking soda to create a mild abrasive for cleaning the lawn chair.
  2. Now take a sponge, dip it into the solution, and clean the chair in a circular motion.
  3. Rinse the chair with clean water after scrubbing and let it air dry.
  4. Now take some amount of Vaseline petroleum jelly in your hand and apply it evenly all over the chair.
  5. Let it sit for about a minute, and then remove the jelly with a microfiber cloth.

Here is the link to a study discussing the properties of petroleum jelly in our daily lives.

Method 5: Using A Heat Gun

The steps mentioned above might look pretty simple and easy to do, but using a heat gun is a complicated mechanism.

Therefore, you need to be familiar with using a heat gun before you start using it on your chalky lawn chair.

Here are the steps you need to follow for using a heat gun to clean your plastic lawn chair.

  1. Start with setting up the temperature of your heat gun from low to medium, depending on the brand of your heat gun. If you have any doubt, always go for the lower settings.
  2. Now move the gun over small sections of the chair to heat the area evenly. You will observe that the quality of plastic is improving.
  3. Once you are satisfied with the section you are working on, move on to the other section.
  4. Repeat until the complete chair is cleaned.

This process is a long one and might demand a lot of patience from your side. Make sure you work equally on all the sections. Otherwise, patches might be formed on the chair.

Rows of black plastic lawn chairs

Method 6: Using Spray Paint

Using a heat gun is one of the most complicated and time-consuming processes to keep your chair an excellent shiny look.

The easier cleaning your chalky plastic lawn chair is by using spray paint to restore the color. Here are the steps that you will need to follow:

  1. Mix some vinegar and baking soda in a bucket of water and clean the chair with a sponge.
  2. Let the chair dry and then spread some newspaper on the floor and turn your chair upside down.
  3. Take the can of the spray paint and start spraying the bottom region of the chair. Make sure that there is a distance of at least 8 inches from the floor.
  4. Once the bottom part of the chair is painted and dried, turn the chair upright and repeat the same process for the upper side of the chair.

Some areas of the chair might demand some extra coats depending on the quality of the paint.

How To Prevent The Oxidation Of A Plastic Lawn Chair

There are a few precautions that you can take to prevent your lawn furniture from getting a chalky look. Here are some tips that you should consider:

  • First, make sure you bring your furniture inside, especially when the sun is really strong.
  • If your furniture is big and cannot be brought inside, buy a good quality plastic protection spray to protect your furniture from the harmful UV rays from the sun.

Frequently Asked Questions

How Can I Get Stains Out From A White Plastic?

Here are a few methods that you can consider for treating stains on white plastic:

  1. Bleach: Mix one part of bleach in 4 parts water and submerge the plastic into the solution for an hour, then remove the piece and wipe it dry with a clean cloth. Bleach is pretty handy for cleaning various materials such as oyster shells and silicone ear plugs.
  2. Vinegar: Mix equal parts of vinegar and water into a bucket and dip the plastic into the solution; remove the piece after one hour and wipe it dry with a cloth.

How Can I Remove Mildew From Plastic Chairs?

Lemon juice works best for mildew. Spray some juice on the plastic, let it sit for 10 minutes, and clean the area with a clean cloth.

Conclusion 

Beautiful lawns are one of the reasons that people can enjoy the summer to the fullest with a cold glass of lemonade. Maintaining the lawn furniture might seem like a challenging task, but it is not if you use the right products. You can also opt for preventive measures to keep the furniture in its best shape.

How To Clean Ceiling Fans With Vinegar

Clean white ceiling fan

Ceiling fans are one of the major necessities, especially in the warm regions of the country. To prolong the lifespan of a ceiling fan, it is essential to learn how to clean ceiling fans with vinegar, as vinegar is one of the most home-friendly items.

How To Clean Ceiling Fans With Vinegar

You need to be patient while cleaning the ceiling fans; thus, make sure you pick a weekend to clean your ceiling fans. Vinegar and baking soda are some of the most pocket-friendly materials that we will be using in various methodologies involved in cleaning the ceiling fan.

Living room space

A Few Steps For Your Safety

Before you begin with cleaning your ceiling fans, here are a few steps for your safety that you should not miss at any cost:

  • First, ensure you wear the cleaning safety kit, and it involves safety goggles, a face mask, salute, and safety gear. 
  • Second, ensure the ceiling fan is switched off; double-check this step; otherwise, it might result in nasty injuries.
  • Finally, the ceiling fan blades might take some time; thus, make sure you sit on a step stool or take a long ladder to avoid any strain on your arms and neck.

There is a lot of dust involved in the cleaning of a ceiling fan.

If you are an asthma patient or suffer from any other respiratory diseases, avoid cleaning the ceiling fans by yourself.

Materials Required

Before moving on to the cleaning process, let us get the ingredients required to keep the cleaning process seamless and easy.

Here is the list of materials required for cleaning your ceiling fans with vinegar.

  • A screwdriver: It will help in removing the blades.
  • A step ladder: This will help you in reaching the desired height for better cleaning.
  • Vinegar: It is the main cleaning ingredient.
  • Baking soda: In case of excess dirt and gunk
  • Old Pillowcase: Pulling down the ceiling fan.
  • Old sheets: It is required to collect the dirt.
  • Toothbrush: Required for scrubbing.
  • Bucket
  • A clean cloth 

Step 1: Cleaning The Ceiling Fans Without A Ladder

To ensure the best quality of your ceiling fan, it is necessary to clean them regularly; thus, here is the step-by-step guide for cleaning the ceiling fans without a ladder:

  1. Start with spreading some old sheets on the floor to accumulate the dirt that will be removed while cleaning and keeping a broom ready next to the sheet.
  2. Now take your ceiling fan duster and start dusting the fan to remove the dust and debris from the fan. Continue to dust until you see the clean surface of the fan.
  3. Now use the broom to collect the dust in one place on the sheet.

This step might be difficult for asthma patients and people with shortness of breath; thus, be careful during this step.

Step 2: Removing The Grease

Once you are done removing the dust and debris from the ceiling fan, it is time to remove the grease.

Here are the steps that you need to follow in cleaning the grease off the ceiling fan:

Clean white ceiling fan
  1. Take a dry paper towel or a dry cloth and place it on the greased area. 
  2. Let it absorb the grease and then wipe to remove the grease and extra dirt from the ceiling fan.
  3. Now take a wet sponge or a soft cloth to wipe the ceiling fans clean.

Repeat the above steps until the thick grease is removed, it will leave the spots, but that will be taken care of by the vinegar solution that we will prepare in the upcoming steps.

Step 3: Removing The Ceiling Fan Blades For Cleaning

To give some relief to your arms and neck, move forward by removing the ceiling fan blades for cleaning. It will allow you to clean the smallest spots on the blades and yield better results.

Here are the steps you need to follow:

  1. You will need a head screwdriver and a step ladder to remove the blades from the ceiling fan.
  2. Take the screwdriver and start unscrewing to remove the blades. You need to place the scoot just behind the blade and start unscrewing.
  3. There are a total of three screws you need to remove; tackle every screw one by one.
  4. With the last screw, you have to be extra careful, hold the ceiling fan’s blade with one hand, and use the other to unscrew the blade to avoid any fall.

Here is the link to a video guide highlighting the process to understand better going through the steps mentioned above.

Step 4: Cleaning The Ceiling Fan With Vinegar And Baking Soda Mixture

If your ceiling fan is extra dirty and has greasy spots on it, you have to move forward to cleaning the ceiling fan with vinegar and baking soda mixture to get really good results. This mixture is pretty versatile, it also works for cleaning Jack Rogers shoes, hand saw blades, grill mats and pizza ovens.

Here are the steps that you need to follow:

  1. Start with taking a bowl and mixing two tablespoons of baking soda, four tablespoons of soda water, and four tablespoons of vinegar to prepare the cleaning solution.
  2. Now take an old toothbrush and dip it into the solution and start scrubbing the blades with it. Do not forget to apply the solution to the back, edges, and corners of the fan. 
  3. Repeat The above steps until the required results are met.
  4. You can dip a microfibre cloth or soft cloth into the solution and wipe the fan with it to treat the stains.
  5. Once the cleaning is done, wipe the fan dry with a dry cloth or kitchen towel, and once the fan is dried, screw the blades back on the ceiling.

Here is the link to a study discussing the cleaning properties of vinegar as a major ingredient.

Ways To Clean The Ceiling Fan With Homemade Vinegar And Baking Soda Cleaning Spray

There are various ways to clean the ceiling fan with the same ingredients. We will now discuss how to clean the ceiling fan with homemade vinegar and baking soda cleaning spray.

Here are the steps that you need to follow:

  1. Take an empty spray bottle and mix equal parts of vinegar and baking soda with some clean water. Shake the bottle and mix the ingredients thoroughly.
  2. Now spray the solution on the greased area and let it sit for five minutes. Now use a piece of soft cloth to clean the greased area off.
  3. If you want to use a sponge for cleaning, spray the solution into the sponge and start wiping the fan in a clockwise manner.
  4. Once the fan is clean, let the fan air dry or wipe the fan dry with a microfibre towel.
Room with ceiling fan

Cleaning a ceiling fan is not much of a difficult task but demands a bit of elbow grease. However, once you are done with the cleaning, the results are incredibly satisfying.

Maintaining A Ceiling Fan

If you want to save yourself from huge physical effort while cleaning, you need to know the ways of maintaining a ceiling fan in the first place.

Here are some tips for maintaining the quality of a ceiling fan:

  • Always remove the blades while cleaning because the dirt starts to accumulate around the motor. It will result in overheating and will result in the reduction of the lifespan of the ceiling fan.
  • You can also use furniture polish as a final touch while cleaning to protect the surface of the fan.

A final polishing will not let the dust particles accumulate on the surface of the fan. Thus it prevents you from cleaning the fan now and then.

Frequently Asked Questions

Which Direction Should A Ceiling Fan Rotate During Summers?

During the summer days, the fan’s rotation must be set counter-clockwise, as it will kick the hot air out of the room and make some space for the cold air to come inside the room. This way, the rooms will be comparatively cooler than the ceiling fan set in a clockwise direction.

How Can I Save More Energy By Using A Ceiling Fan?

Nowadays, high-speed ceiling fans are getting quite popular in the market for their energy-saving properties. In addition, they provide you a wind chill effect without using an air conditioner, thus save you from extra bills all year round.

Which Length Downrod Must Be Used With Ceiling Fans?

To enjoy the cool air from the ceiling fan, the height of the blades must be between 2.4 to 2.8 meters from the floor. This way, you can enjoy the maximum efficiency of the ceiling fan.

Conclusion 

One can opt for various methods while cleaning a ceiling fan, but this method is both home-friendly and pocket-friendly. However, the cleaning items that you will buy from the store will be expensive and might contain some harsh materials that can damage the ceiling fan; thus, always go for a home-based cleaning approach.

How To Clean Silicone Ear Plugs

Silicone ear plugs

We want to remind you that prolonged usage of unhygienic ear plugs can lead to various ear problems. Thus it is essential to be familiar with how to clean silicone earplugs, especially if you are a swimmer and use the silicone earplugs daily.

How To Clean Silicone Ear Plugs

To make sure your silicone earplugs get completely cleaned, you have to make sure that you are cleaning your ears as well. The earwax from your ears can end up making the earplugs dirty again. Be very particular when cleaning comes into the picture; it is necessary for your health in the long term.

Silicone ear plugs

Materials Required

Before moving on to the cleaning process, let us get the ingredients required to keep the cleaning process seamless and easy.

Here is the list of materials required for cleaning your silicone ear plugs:

  • A damp cloth to clean your ears from the outside.
  • An ear wax softener is required to clean your ears before you wear the earplugs back on.
  • A syringe but without a needle to pour water and deep clean the earplug.
  • A soap for treating the dirt.
  • A small bowl: It is necessary for mixing the liquids.
  • Some alcohol: This is a must for disinfecting the earplugs after cleaning.
  • A spray bottle
  • A soft-bristled brush: To treat the discolored area of the silicone earplugs.
  • Some warm water
  • A soft towel: wipe the earplugs dry.
  • Bleach (optional): It is only required if your earbuds have gone through some discoloration
  • A pair of rubber gloves

The items mentioned above are easily available in the household. Thus you might have gotten a hint that it is not much of a challenging task.

First, however, make sure you handle the silicone earplugs with care and do not damage them.

Preventing Your Ear Plugs From Getting Extremely Dirty

It is tough to deal with an extremely dirty silicone plug; thus, make sure you follow a routine to maintain the quality of the earplugs.

Here are some of the pointers that you can follow for preventing your earbuds from getting extremely dirty:

  • Avoid extra touching of the earplugs; if you are not going to wear them, just put them back into the case.
  • Do not touch the ear tips with your hands to remove any contamination from the earbud; you will end up worsening the situation even more.
  • Make sure you have washed your hands before touching the earplugs.
  • Always keep your silicone earplugs in a clean and dry case to avoid any bacterial growth.

This point is critical; never share your silicone earplugs with anyone else.

The points mentioned above might seem basic, but the cleaning process will be comfortable for you if you follow these points religiously.

Moreover, these pointers will increase the lifespan of your earplugs.

Step 1: Cleaning Your Silicone Ear Plugs

If you are a swimmer, earplugs are a part of your daily routine. Thus it is your responsibility to keep them in the best shape if you want your ears to be healthy.

Here are the steps that you will need to follow for cleaning your silicone earplugs.

  1. Take a bowl and add some water to it. Now add a few drops of mild liquid soap and mix it well to create a cleaning solution.
  2. Now take an old toothbrush and dip it into the solution and start scrubbing the earplugs.
  3. Take a dry and soft towel and clean your earplugs dry.
  4. Now take an empty spray bottle and add some alcohol to it.
  5. Give your earplugs a spray of alcohol to disinfect them from any bacterial growth.
  6. Once the earplugs are sprayed, leave them on the towel to air dry.

See, this is a short process of cleaning the earplugs if they are stain-free; if your silicone earplugs have certain discoloration, you will need to follow the next step.

Here is the link to a study indicating the disinfecting properties of alcohol. They work pretty great for disinfecting items like card sleeves, printer drums and Juul pods as well.

Step 2: Treating The Discoloration On The Ear Plugs

If your silicone earplugs are slightly old, you might notice some discoloration that looks quite gross.

It does not mean the earplugs are dirty, but the quality of the silicone becomes quite questionable, and you will not feel confident wearing them.

Here are the steps you need to follow for treating the discoloration on the earplugs.

  1. Take an empty spray bottle and fill it with some diluted bleach.
  2. Now spray the bleach solution on the discolored area and let the spray sit on the earplugs for at least 15-20 minutes.
  3. Now wear your rubber gloves to avoid any reaction on your hands, and take a soft bristle brush to scrub the plugs.
  4. Scrub the earplugs in a circular motion and clean them with cold water.
  5. Now take a soft towel and wipe the silicone earplugs completely dry.

Bleach is one of the best ingredients when it comes to treating the colored parts on any item, they work great for faux wood blinds, dried oyster shells, and bamboo blinds as well. Here is the link to a video guide about cleaning the silicone earplugs.

Step 3: Cleaning Your Ears Before Reusing The Silicone Ear Plugs

You cannot miss this step at all; make sure your ears are completely clean and the wax is completely removed from your ears.

If you skip this, there will be no use in cleaning your silicone earplugs in the first place.

Here are the steps that you will need to follow for cleaning your ears before reusing the silicone earplugs:

  1. Take a soft, damp cloth or a microfiber cloth and clean the outside and inside of your ear. Never use a cotton earbud, as it will move the earwax even further. Microfiber cloths are great tools for cleaning, they are used for cleaning mother of pearls and drum sets as well.
  2. Now put some earwax solution into your ears by using a dropper and wait for at least fifteen minutes to let the softener do its magic. An ear wax softener is easily available in pharmaceutical stores.
  3. Now take a syringe, fill it with either saline solution or water, and squirt the water into your ear to wash off the wax.
  4. Drain the remaining amount of liquid from your ears and pat your ears dry.

Follow these steps every few days to ensure the cleanliness of your ears; it is good for your hearing ability as well.

In addition, this routine will help you keep your silicone earplugs in the best shape possible.

Why Is It Important To Check The Due Date Of Your Silicone Ear Plugs?

Silicone earplugs are one of the most sustainable earplugs available in the market right now, but we cannot forget that silicone earplugs also have an expiry date that has to be honored.

Here are the answers to why is it important to check the due date of your silicone earplugs:

  • Once the due date has passed, the quality of the silicone starts deteriorating, and that is not healthy for the ears of the user.
  • In addition, bacterial growth will start to happen on the silicone earplugs, thus making them highly unfit for future use. 

Once the due date has passed, the silicone earplugs are supposed to be disposed of in the trash. They can be worn for a maximum of four weeks, depending upon what brand you are using.

Frequently Asked Questions

How Many Times Can We Use A Single Pair Of Silicone Ear Plugs?

You can keep on reusing your silicone earplugs until they start getting dirty; that is up to five uses at the maximum. Also, keep a check on the due date of your silicone earplugs as you need to dispose of them in the garbage since they cannot be used any further. Finally, make sure you do not touch your earplugs often as it results in bacterial growth over the silicone earplugs.

Is It Possible To Sleep While Wearing Silicone Ear Buds?

Yes, it is completely fine to sleep while wearing your silicone earbuds, as they are meant to be worn while sleeping or swimming. However, you might feel a bit uncomfortable sleeping with an earplug inside your ear, especially if you sleep on your side. If you are increasing the use of earplugs, make sure you maintain a hygienic routine to keep them in the best shape.

Is It Possible To Clean Silicone Putty Ear Plugs?

No, do not clean the silicone putty earplugs at any cost, as they are disposable ones made up of a mixture of silicone putty and soy wax. It is easier with foam earplugs, and you can just dip them into a bowl of water and scrub a little.

Conclusion 

Never forget the hygiene of your ear is equally important as the hygiene of your earplugs. Thus, it is essential to maintain a fixed routine and clean the buds after every 4-5 uses. The process mentioned above will take hardly a few minutes of your life, but it will prolong the life of your silicone earbuds and ensure a good hearing tendency as you get older. 

How To Clean Turkey Necks

Turkey with a close up of its neck

Who does not love holiday food and a turkey is one of the best parts of the holiday meal. People eagerly wait for the holidays just to enjoy the delicious turkey with their family and friends. But to make a good turkey, the meat must be cleaned properly; thus, in this article, we will discuss how to clean turkey necks to enjoy some clean and delicious meat.

How To Clean Turkey Necks

Cleaning a turkey is one of the most rigorous processes, especially cooking and eating a wild turkey. We recommend a store-bought turkey, as a lot will reduce the efforts for cleaning. We will be discussing each step in detail to understand all precautions and tools you need for cleaning.

Turkey with a close up of its neck

Step 1: Thaw The Turkey Before You Start Cleaning

If you are not going to cook the turkey right away after you buy it from the store. It is recommended to thaw your turkey before you start cleaning; it will improve the texture of the meat after cooking.

Here are the steps you need to follow:

  1. Take the turkey and place it in a plastic bag.
  2. Fill a bucket with cold water and completely submerge the turkey into that cold water.
  3. Make sure you change the water after every 30 minutes.
  4. You can also directly take the turkey and thaw it into the microwave by setting it in defrosting mode. 

You are not comfortable with any of the methods above; you can refrigerate the turkey for at least 24 hours. Here are some precautions that you might follow:

  • If you are thawing the turkey in cold water, make sure the plastic wrap is airtight, the water should not enter the wrap.
  • If you are thawing in a refrigerator, thaw it for at least two days before cooking.
  • Make sure your hands are perfectly washed before you start handling the turkey. Tie up your hair and wear rubber gloves for protection.

Step 2: Removing The Packaging And Placing Turkey In The Baking Dish

Once the thawing is done, move forward with removing the packing and placing the turkey in the baking dish.

Remove the packaging without damaging the turkey’s skin and take it out carefully and place it on the baking dish.

Here are some pointers for consideration during the process:

  • Do not let many surfaces touch the turkey; the more surfaces the turkey touch, the more you will need to clean the turkey.
  • Ensure the juices that come off the turkey do not touch any of the other food around it. If there is an accidental contact, make sure you throw away the food.

In the last point, there is an exception, the food that is supposed to be cooked inside the turkey does not need to be thrown in case of contact.

Step 3: Removing The Neck And Giblets From Turkey

Once the packaging is removed and the turkey is placed on the baking dish, it is time to remove the neck and giblets from the turkey.  

Raw turkey
  1. Grab the turkey with your hands to hold it still.
  2. Now take your other hand and carefully reach the inside of the turkey and pull the neck and giblets, leaving the inside hollow.

You can choose to cook the neck and giblets of the turkey. Here is the link to a video highlighting the amazing recipe to cook the neck and giblets of the turkey.

Step 4: Rinsing The Inside Of Turkey

Once the neck and giblets are removed, it is time to move forward with rinsing the inside of the turkey. Here are the steps that you need to follow:

  1. If you have planned to cook brined turkey, start with emptying your sink.
  2. Take a bowl and using your thermocouple water heater add some hot water and a few drops of organic soap in it. 
  3. Now take a soft brush, dip it into the soapy water and start cleaning the inside of the turkey.
  4. Now fill the turkey with some cold water ( 2- 3 inches) and rinse the turkey’s cavity with some hot steam.
  5. Once the cavity is cleaned, drain the water out from the turkey and place it on the roasting pan.

If you are not cooking brined turkey, you do not need to wash the turkey outside. This is because cleaning the outside of the poultry animals does not help in removing bacteria at all.

Though here are some pointers you might consider while cleaning the inside of the turkey.

  • Make sure the roasting pan is kept next to the sink to avoid any extra mess.
  • Cover the surrounding area with paper towels to avoid any spills in your floor.

This is one of the most crucial steps in hygiene; thus, make sure you take your time while going through the process.

Step 5: Washing The Areas Touched By Turkey

When you are cleaning the turkey and removing the head and the giblets from the body, many juices are being secreted from the body; that juice contains a lot of bacteria.

Thus you need to start washing the areas touched by the turkey to ensure the hygiene of the kitchen and other eatables is not compromised.

Here are the steps you need to follow:

  1. Start with washing your own hands and forearms with warm water and soap. Wash for at least a minute to make sure the bacteria is removed.
  2. Take a bowl and add some hot water to it. Add a few drops of liquid soap and mix it well.
  3. Now take a scrub brush and start cleaning the sink, shelf, and other utensils that the turkey has touched.
  4. Make sure you throw away all the eatables that the turkey touched, as they are cross-contaminated.

This step is necessary to ensure the safety of the kitchen and the family members as well. Meat can be a source of various diseases; thus, we have to make sure that we eat clean meat.

Here are some pointers that you might want to consider while cleaning:

Oven roasted whole turkey
  • You can also spray an organic disinfecting liquid into the kitchen for extra protection.
  • You can also make one by mixing bleach and water and rubbing it on the kitchen surface. Make sure you clean the bleach coating before using the kitchen.

Plucking A Clean Wild Turkey

The mechanism mentioned above works well for the store-bought turkey, but this method of cleaning the turkey will work well with the clean wild turkey. Here is what you need to do to pluck the clean wild turkey.

  1. If you are planning to roast or deep fry your turkey, start with plucking the turkey’s feathers with your bare hands. Make sure you wear rubber gloves.
  2. Now take a sharp knife and remove the head and neck of the turkey; you can also remove the wings if you like. Make sure you leave the drumstick shape after cutting.
  3. Now heat a large pan at 66C and dip the turkey into the water for at least 30 seconds to make the plucking easy.
  4. Take a strong rope and hang the turkey at head height. Now start to pluck the feather, taking a few at one time.
  5. Once the turkey is entirely plucked, take a knife and remove the turkey’s innards for clean meat.
  6. Now you can start separating the body parts of the turkey if you want to cook separately.

Go for a store-bought turkey if you want a shorter process of cleaning and cooking; dealing with a wild turkey requires some elbow grease.

Frequently Asked Questions

What Will Happen If You Forget To Rinse Turkey While Cleaning?

If you are cooking roasted turkey, there is no need to rinse the turkey at all, but if you cook brined turkey, you cannot miss this step at any cost, as food cooked inside the turkey can spread bacteria if not rinsed. Here is what will happen if you forget to rinse the turkey while cleaning.

How Long Will It Take For Turkey To Unthaw In The Refrigerator?

The turkey should be thawed for at least 24 hours for every 5 pounds of frozen meat. So for a 20-pound turkey, you will need to thaw it for four days. Keep a check on the turkey while it is in the refrigerator; see if the turkey needs to be drained. Here is the answer to how long it will take for the turkey to unthaw in the refrigerator.

Conclusion 

Cleaning the turkey necks might seem like a lot of work, but trust us, once you taste that delicious meat after cooking, all this hard work will seem worth it, it might actually be easier than cleaning sheepshead. Make sure the hygiene of the kitchen is not compromised at any cost. Keep your kitchen organized and disinfected during the cleaning process, and it will minimize the mess in the kitchen.

How to Clean Card Sleeves

Hand holding three cards placed in card sleeves

If you are a card collector, you might be aware of the importance of having good quality card sleeves to protect your precious card collection. However, even though you might not use the cards much, if the card sleeves are not stored properly, they will get dusty and dirty. This article will discuss how to clean card sleeves to keep your card safe and clean.

How to Clean Card Sleeves?

This article will discuss three different methodologies that you can use for cleaning your card sleeves. You need to be extremely patient and careful while you hold and clean the card sleeves. Otherwise, you might end up damaging the whole thing. Make sure you get your cards carefully out from the sleeves and put them somewhere safe.

Materials You Need to Prepare

As mentioned above, the article has three different methodologies, but all three methods will use home-based materials.

Hand holding a trading card covered with a card sleeve

We will not be using anything fancy or of strong chemical nature.

Here is the list of materials you need to prepare before you start cleaning the card sleeves.

  • A large bowl to pour water for the bath.
  • Hot water to loosen up the debris from the card sleeves.
  • Coldwater to separate the dirt and the debris from the card sleeves.
  • An old soft-bristled toothbrush from gently scrubbing the dust out of the card sleeves.
  • Some rubbing alcohol acts as a cleaning spirit to remove any stains or dust in just one go.
  • A microfiber cloth to pour the rubbing alcohol and clean the card sleeves.

The materials mentioned above are easily available in the market and are quite pocket-friendly and safe to use while cleaning.

Method 1: Give Your Card Sleeves a Refreshing Bath

This cleaning method is necessary when the card sleeves are way too dirty with dust and other debris. You do not need to be a professional to experiment with this method for cleaning your card sleeves.

To give your card sleeves a refreshing bath, here are the steps that you need to follow.

  1. Take a large bowl and add some warm water into it; you can add any mild cleaning agent of your choice and mix the ingredients well with a spoon or spatula.
  2. Once the ingredients are perfectly mixed, dip your card sleeves into the mixture. Soak the card sleeves for at least a few minutes to loosen up the dirt and bacteria.
  3. Once a few minutes are gone, take another bowl and fill it with some cold water. Transfer the cards into the cold water, and you will observe that the dirt and debris are separating from the cards.
  4. Leave the cards submerged in cold water for a while. After 15 m minutes or so, remove the sleeves from the cold water and let them air dry.
  5. It might seem that the armor has been cleaned, but still do not touch the sleeves as it might result in unwanted folds.
  6. Leave the cards as it is for about an hour to let them dry naturally.

You might become impatient and try to speed up the drying process. Do not use any types of external tools as it may lead to severe damage to card sleeves.

Method 2: Cleaning the Card Sleeves With an Old Toothbrush

Cleaning the card sleeves with water is a risky process, as it may cause severe water damage to the card sleeves. It is always recommended to maintain the card sleeves daily to keep them in the best shape.

Here are some pointers for cleaning the card sleeves with an old toothbrush:

  • A soft-bristled brush will do the trick in removing the dust and debris from the card sleeves.
  • You just need to hold the cards in one hand and softly use the brush in a swift motion to remove any type of dirt.
  • Ensure you are not putting much pressure on the card sleeves, as it might result in severe folds or any other damage.
  • Do not use a hard brush, as it might tear the card sleeves.

To keep the card sleeves safe from getting extremely dirty or any other damage, make sure you maintain the quality by storing them properly and taking every possible precaution to avoid any unwanted fold and damage.

Method 3: Using Alcohol to Clean the Card Sleeves

If you are not satisfied with the results from the previous methodologies, alcohol is here to save the day.

But we must warn, you have to be extremely careful while using alcohol to clean the card sleeves.

Here is the process for using alcohol to clean the card sleeves:

  1. Take a bottle of some rubbing alcohol and a microfiber cloth to dab the card sleeves with alcohol.
  2. Put a few drops of alcohol on the microfiber cloth and gently rub them on the card sleeves.
  3. You will observe that the alcohol plays the role of cleaning spirit, and the dirt is gone just one swift clean.

During this method, a sign of warning makes sure you do not put an extra amount of alcohol on the cloth; otherwise, the sleeve might stick, or any unwanted folds might be created. Be patient while cleaning the card sleeves.

Here is the link to a video guide of the above methodology.

How Can You Keep Your Card Sleeves from Getting Dirty?

Card sleeves seem to get dirty, especially when they are not stored in the best conditions. Here are some pointers on how can you keep your card sleeves from getting dirty:

  • First, make sure you buy a binder and store your card sleeves to keep them safe from any kind of dust and dirt.
  • You can also store your card sleeves in a closed box.
  • Finally, make sure there is no eating or drinking around the card sleeves.

Follow the precautions mentioned above to keep your cards and card sleeves in the best shape possible.

Hand holding three cards placed in card sleeves

How Long Do the Card Sleeves Usually Last?

The lifespan of card sleeves depends on the usage of the card sleeves and the maintenance provided to the card sleeves from your side.

Here are some pointers for how long the card sleeves usually last depending on the use:

  • If you are using the trading cards for several hours continuously, you can expect the card sleeves to last for a few weeks or a month.
  • On the other hand, if you do not remove the cards much from the sleeves and only use them to store your cards, you can expect the card sleeves to last for a few years or forever.

Most people are seen to change their card sleeves in a couple of months.

When Is the Right Time to Replace the Card Sleeves?

If you are using the card sleeves daily, a time will come when you will need to replace your card sleeves before it starts to damage your cards.

Here are some pointers on when the right time is to replace the card sleeves:

  • First, it is suggested to replace the card sleeves when they start to get dirty, you can try to clean them, but it can result in some damage to the card sleeves.
  • Second, if the card sleeves do not shuffle smoothly as they did in the past, it is another sign that you need to replace them.
  • Third, if the stickiness among the sleeves seems to increase, it is another sign that the sleeves need to be replaced as soon as possible.
  • Fourth, once the card sleeves start getting wrinkly, they need to be replaced, as they might damage the card inside it.
  • Finally, if your card sleeve got some o=kind of the mark, you need to replace it at any cost immediately.

If you avoid the points mentioned above, you can end up damaging the quality of your cards.

Frequently Asked Questions

How Do You Choose the Sleeves for Your Cards?

The card sleeves must be of the same size or similar size as the card. In addition, the card sleeves are supposed to be opaque, thick, and must have a plain background to avoid any hints. So, here is the answer to how do you choose the sleeves for your cards.

Is It Possible That Card Sleeves May End Up Damaging the Cards?

Yes, card sleeves may damage the cards, especially if the card sleeves are of the wrong size or are not being used correctly. The only way to protect your cards is not to use them much and keep them stored.

Conclusion 

Many people recommend replacing the card sleeves instead of cleaning them, as they believe the cleaning will damage the sleeves even more. However, if you are not a professional cleaner, be patient with the cleaning; make sure you handle the card sleeves with immense care to avoid any folds or water damage during cleaning. Remember, you can always replace the card sleeves if needed.